Carel k.Air, Руководство пользователя, Страница: 38 / 192

38
pGDX and Web server (accessory)
k.air +030220981 rel. 1.2 - 01.12.2020
6. PGDX AND WEB SERVER ACCESSORY
6.1 Introduction
The pGDx terminal, available as an accessory, is intended for unit managers and commissioning technicians, once commissio-
ning has been completed using the pGNE terminal. It can display the web- server graphic pages included on the controller. It is
available in the versions with fl ush or surface wall mounting.
pGDX fl ush mounting pGDX surface wall mounting
30220980_045_R01
30220980_046_R01
Fig. 6.a Fig. 6.b
Notes:
• nonetheless, the pGDx can be used, in the service profi le, to view the pGNE terminal screens and to commission the system;
• the pGDx terminal product label shows the MAC Address.
30220980_251_R01
26 - Sep -2016 Rev. 1011A
SN A00002352
MAC 00 : 0A : 5C : 80 : 54 : 8 A
DC 24V 0.3 A PELV - 20T60°C TYPE 1 ENCL
Code
PGR04000TCDA0
Made in Italy
d r a c S M B d r a c s u B d l e i F
XXXXXXXXXXXX
28
pGDE
pGDx
MAC 00 : 0A : 5C : 80 : 54 : 8 A
Fig. 6.c
Network connection of the pGDx terminals and k.air
Procedure
1. connect the pGDx terminal to the power supply and the Ethernet cable. See technical leafl et +050001895;
2. once both devices have been powered on, enter: “kair01.local” (fi gure) in the text box shown on the display.
3. confi rm by selecting Check and then, if the network is stable, GO.
Once communication has been established, the initial screen (fi gure) is shown on the pGDx.
30220980_255_R01
30220980_039_R01
Fig. 6.d Fig. 6.e
If needing to use the temperature and humidity probes included in the pGDx terminal:
• go to screen Y065 and enter the last 4 digits of the MAC Address. In this way, k.air will acquire the values read by the tem-
perature and humidity probe, which can be assigned as a room temperature and humidity probe for the space where the
terminal is located.