manualshive.com logo in svg

Carel k.Air, Руководство пользователя, Страница: 29 / 192

Поделиться
Скачать
Carel k.Air Скачать руководство пользователя страница 29

29

User interface

k.air +030220981 rel. 1.2 - 01.12.2020

Fans               Qa03

Air quality

Set:        800ppm

Probe:    684.6ppm

     Req:     Act:

Supply:  0%     0%

Return:  0%     

30220980_084_R01

Coils              Qa04

Supply t.: 26.1°C°
Set point: 26.0 C
       Req: Act:
Heat:          0%

30220980_086_R01

Air quality probe measurement and set point. 
Request and % activation of the supply/return fans

Coil request and activation

OFF

ECONOMY

PRE-COMFORT

COMFORT

Scheduler          Qa09

Unit status:   COMFORT

Daily:      

Vacation:

Special day:

Active from:     c.pCO

c.pCO

th-Tune

30220980_087_R01

Scheduler active from c.pCO controller or from th- Tune 
room terminal. Scheduler active: daily programming, holiday 
program or special days.
The next two screens show information on the software ver-
sion and operating system, the size of the k.Air controller and 
the cycle time.

On/Off 

Unit On/Off        Qb01

ON

Press ENTER to change

Unit On/Off        Qb01

OFF

Press ENTER to change

30220980_088_R01

Switch the unit on/off  from the keypad..

Set point

Read/write and read-only screens displaying the main unit information:
•  Temperature, humidity, pressure, fl ow-rate and air quality set point in relation to the probes available and control functions 

enabled.

•  Operating mode: cooling, heating;
•  Summary screen showing the set point value, minimum and maximum limit and current operating mode.

Note: 

the set points shown in this menu diff er according to whether or not the scheduler is enabled. With the scheduler di-

sabled, the set points are fi xed references and are available even after a power failure. With the scheduler enabled, the set points 
are temporary until the next profi le change (e.g. Comfort, Economy, etc.) and/or unit is switched off .  In this case,  the reference 
set  points will depend on the profi le and will be shown on the screens in menu Aa. Also see the chapter on the Scheduler.

Содержание k.Air

































































































































































































Отзывы:

Нет отзывов