Canon iR3570 Series, Руководство по обслуживанию

Страница: 655 / 722

Chapter 16
16-29
<MISC-R>
T-16-47
<MISC-P>
T-16-48
SLT-CLR Clearing the salutation setting
1
<Operating procedure>
1) Select this item and press the OK key.
SND-STUP Clearing the send-read settings
The send-read settings are cleared when the main power switch is turned OFF and
ON.
1
<Operating procedure>
1) Select this item and press the OK key.
2) Turn the main power switch OFF and ON.
CA-KEY Clearing the CA certificate and key pair
The CA certificate and key pair are cleared when the main power switch is turned
OFF and ON.
2
<Operating procedure>
1) Select this item and press the OK key.
2) Turn the main power switch OFF and ON.
COPIER > FUNCTION > MISC-R
Sub-item Description Level
SCANLAMP Lighting the LED lamp (for document lighting)
1
<Operating procedure>
1) Select this item.
2) Press the OK key. The LED lamp (for document lighting) is lit for three
seconds.
COPIER > FUNCTION > MISC-P
Sub-item Description Level
P-PRINTS Printing out the service mode settings
1
<Operating procedure>
1) Select this item.
2) Press the OK key to start printing.
USER-PRT Printing out the user mode list
1
<Operating procedure>
1) Select this item.
2) Press the OK key to start printing.
LBL-PRNT Printing out the service label
1
<Operating procedure>
1) Load A4 or LTR paper on Cassette 1.
2) Select this item.
3) Press the OK key to start printing.
PRE-EXP Checking the pre-exposure lamp (LED)
1
<Operating procedure>
1) Press this item to reverse its display.
2) Press the OK key. After executing each operation for several seconds, the
machine stops automatically. (All lit)
3) Press the OK key to start printing.
Reference
If the lighting of the pre-exposure lamp gives a problem to the photoconductor
drum, rotate the drum.
D-PRINT Printing out the service mode (DISPLAY) contents
This mode outputs only the DISPLAY items (excluding ones output by P-RPINT/
LBL-PRINT/HIST-PRINT and ALARM).
1
<Operating procedure>
1) Select this item.
2) Press the OK key to start printing.
ENV-PRT Printing out the in-machine temperature & humidity and fixing temperature
change log
Changes of the in-machine temperature & humidity and the fixing temperature
(center) are printed as log data.
1
<Operating procedure>
1) Select this item.
2) Press the OK key to start printing.
KEY-HIST Printing out the operating section key input history
2
<Operating procedure>
1) Select this item.
2) Press the OK key to start printing.
HIST-PRT Printing out the jam history and error history
2
<Operating procedure>
1) Select this item.
2) Press the OK key to start printing.
COPIER > FUNCTION > CLEAR
Sub-item Description Level