Canon iR3570 Series, Руководство по обслуживанию

Страница: 617 / 722

Chapter 15
15-29
E5F2 0001
Saddle guide error
The guide home
position sensor does not
go on when the guide
motor has been driven
for 0.455 sec.
Guide motor (M3S)/
guide home position
sensor (PI13S) Check the guide motor. Check the
guide home position sensor.
Replace the finisher controller
PCB. Check the guide drive
mechanism.
0002 The guide home
position sensor does not
go off when the guide
motor has been driven
for 1 sec.
Guide motor (M3S)/
guide home position
sensor (PI13S)
E5F3 0001
saddle alignment error
The aligning plate
home position sensor
does not go on when the
alignment motor has
been driven for 0.5 sec.
(at time of
initialization, 1.67 sec.)
Alignment motor
(M5S)/aligning plate
home position sensor
(PI5S) Check the alignment motor. Check
the alignment home position sensor.
Check the aligning plate drive
mechanism. Replace the finisher
controller PCB.
0002 The aligning plate
home position sensor
does not go off when
the alignment motor has
been driven for 1 sec.
Alignment motor
(M5S)/aligning plate
home position sensor
(PI5S)
E5F4 0001
Saddle rear stapling
error
The stitching home
position sensor does not
go on when the stitch
motor (rear) has been
rotated in reverse for
0.5 sec or more.
Stitch motor (rear;
M6S)/stitching home
position sensor (rear;
MS5S) Replace the stitcher (rear). Check
the harness. Replace the finisher
controller PCB.
0002 The stitching home
position sensor does not
go off when the stitch
motor (rear) has been
rotated in normal
direction for 0.5 sec or
more.
Stitch motor (rear; MS)/
stitching home position
sensor (rear; MS5S)
E5F5 0001
Saddle front stapling
error
The stitching home
position sensor does not
go on when the stitch
motor (front) has been
rotated in reverse for
0.5 sec or more.
Stitch motor (front;
M7S)/stitching home
position sensor (front;
MS7S) Replace the stitcher (front). Check
the harness. Replace the finisher
controller PCB.
0002 The stitching home
position sensor does not
go off when the switch
motor (front) has been
rotated in normal
direction for 0.5 sec or
more.
Stitch motor (front;
M7S)/stitching home
position sensor (front;
MS7S)
Code Detail code Name Detection Remedy