Canon iR3570 Series, Руководство по обслуживанию

Страница: 663 / 722

Chapter 16
16-37
<USER>
T-16-52
KSIZE-SW Use it to enable/disable support of K paper.
2
<Setting range>
0: do not support K paper [Default]
1: support K paper
procedure
1) Set '0' in this service mode.
2) Set '0' for the following: COPIER > OPTION > BODY > MODEL-SZ.
3) Perform the shut-down sequence, and turn off and then on the main power.
COPIER > OPTION >USER
Sub-item Description Level
COPY-LIM Changing the upper limit of copy count
1
<Setting range>
1 to 9999 [Default: 999]
SLEEP Turning the sleep function ON or OFF
1
<Setting range>
0: OFF
1: ON [Default]
The sleep function is set with Timer in User Mode.
COUNTER1 Setting Software counter 1 on the User mode screen
1
<Setting value>
101: Total 1
[Value at shipping / Value after RAM clearance = 101 -> Cannot be changed]
COUNTER2to6 Setting Software counters 2 to 6 on the User mode screen
1
<Setting range>
0 to 999
CONTROL Limiting the user of a control card for a PDL job
1
<Setting range>
0: Do not use [Default]
1: Use
B4-L-CNT Setting whether to count B4 as the large size or the small size on Software
counters 1 to 6
1
<Setting range>
0: Small size [Default]
1: Large size
COPY-JOB Prohibiting copy job reservation when a card reader and a coin robot are used
1
<Setting range>
0: Copy job reserved [Default]
1: Copy job not reserved
PR-PSESW Setting whether or not to display the print pause function switch
1
<Setting range>
0: No print pause function [Default]
The user screen does not display the print pause function. (Conventional
specification)
1: Print pause function [Default]
The user screen does not display the print output stop and restart settings.
IDPRN-SW Switching the count-up job type about the department management counter
1
<Setting range>
0: Counting BoxPrint, ReportPrint, SendLocalPrint, and PDLPrint in the
PRINT category
1: Counting ReportPrint, SendLocalPrint, and PDLPrint in the PRINT category
CNT-SW Switching the charging counter and default display items
1
<Setting range>
- When the set value is 0 [Default]
101: Total 1
- When the set value is 1
102: Total 2
202: Copy total 2
127: Total A Total 2
- When the set value is 2
101: Total 1
104: Total small
103: Total large
501: Scan total 1
REMPNL Turning the remote panel function ON or OFF
1
<Setting range>
0: OFF [Default]
1: ON
BCNT-AST Switching the job type of counting box prints by ASSIST
1
<Setting range>
0: Count as PDL job [Default]
1: Count as Copy job
COPIER > OPTION > BODY
Sub-item Description Level