Canon iR3570 Series, Руководство по обслуживанию

Страница: 633 / 722

Chapter 16
16-7
<CODE> Error code
<DTL> Error detail code (0000 for none)
<L> Error location
0: Main controller 1: DADF 2: Finisher 3: Not used 4: Reader unit 5: Printer unit
6: Various PDL board 7: Fax board
<P> Not used
<HV-STS>
T-16-5
<CCD>
T-16-6
<SENSOR>
T-16-7
<ALARM-2>
F-16-11
<No.> Alarm sequential number: 1 to 50 (The oldest alarm has the greatest number.)
<DATE> Alarm occurrence date
<TIME1> Alarm occurrence time
<TIME2> Alarm reset time
<CODE> Alarm location code and alarm code
<DTL> Alarm detail code
<CNTR> Total counter value at alarm occurrence
<ENVRNT>
Environmental log display
Changes of [In-machine temperature (deg C)/humidity (%) / Fixing roller surface (center) temperature (deg C) are displayed as log data.
Remarks: The data acquisition cycle can be set at COPIER>OPTION>BODY>ENVP-INT in Service Mode.
F-16-12
COPIER > DISPLAY > HV-STS
Sub-item Description Leve
PRIMARY Primary charge current at photoconductor drum Registrationance detection
control (APVC) Unit: uA
1
TR Transfer current setting for the job executed last Unit: uA 1
BIAS Developing bias setting for the job executed last Unit: V 1
TR-V Voltage at transfer charging roller Registrationance detection control
(ATVC) Unit: V
1
COPIER > DISPLAY > CCD
Sub-item Description Level
TARGET-R Red shooting target value 2
OFST CCD offset level adjustment value 2
GAIN CCD gain level adjustment value 2
MFIL Main-scan MTF correction index 2
SFIL Subscan MTF correction index 2
COPIER > DISPLAY > SENSOR
Sub-item Description Level
DOC-SZ Document size detected by the document size sensor 2