Canon iR3570 Series, Руководство по обслуживанию

Страница: 566 / 722

Chapter 14
14-38
[ Case in the field ]
Description
In the field, a faulty image or a malfunction occurred because of condensation caused on the machine. It is assumed that this condensation occurred because
the machine was installed immediately after it was transferred from a cold place to a warm place.
Field Remedy
When the machine is transferred from a cold place to a warm place, leave it for more than 1 hour without unpacking to let it get to know the surrounding
temperature.
14.2.10.1.61 Combination of main drive assembly and models
0010-4388
iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / / iR3530 / / / /
[ Manual-related ]
Description
The combination of the main drive assembly and models are as follows:
FM2-0241: iR2270/2807 series models
FM2-1772: iR3570/4570 series models
14.2.10.1.62 How to hide message "Functions limited" on Copy screen: Finisher-Q3
0011-6430
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N / / iR4570N / iR2230 / / / iR3530 / / / / / / /
[ Manual-related ]
Description
In order to hide the massage "Functions limited" for the Finisher-Q3 from the Copy screen, set "Limited Functions Mode" to OFF under User mode >
Common Settings.
14.2.10.2 FAQ on Send Specifications
14.2.10.2.1 Address cannot be deleted
0009-2405
iR2270 / iR2870 / iR3570 / iR4570 / / iR2270N / / iR2870N / / iR3570N / / iR4570N / iR2230 / / / iR3530
[ Manual-related ]
Description
An address cannot be deleted if it is registered in one-touch button or as a group. In such a case, delete the address from one-touch button or the group in
advance.
14.2.10.2.2 How to set machine to automatically select appropriate zoom ratio based on size of originals and selected record size when
scanning and sending different size originals: Auto zoom scanning
0009-9980
iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / / iR3530 / / / /
[ Manual-related ]
Description
This is a new function and is adopted first with this machine. This function enables you to set the machine to automatically select the appropriate zoom ratio
based on the size of originals and the selected record size when scanning and sending different size originals.
Field Remedy
[The Send screen > Scanning Settings > Option > Copy Ratio > Auto > select the desired record size > OK > Special Features > Different Size Originals >
select "Same Width" or "Different Width" > OK > Done > Resolution > select "300 x 300 dpi" or "600 x 600 dpi" > OK].
14.2.10.2.3 When sending different size originals, all originals are scanned at same zoom ratio even if machine is set to automatically
select appropriate zoom ratio based on size of originals and selected record size
0009-9992
iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / / iR3530 / / / /
[ Case in the field ]
Description
When you want to make the machine scan different size originals by automatically selecting the appropriate zoom ratio based on the size of each original and
the selected record size, you have to follow the field remedy below. In the field, however, the symptom occurred because only "Auto" was selected in "Copy
Ratio", and "Different Size Originals" was not selected as the special feature setting in the procedure. To prevent the symptom, be sure to follow the procedure
below.
Field Remedy
[The Send screen > Scanning Settings > Option > Copy Ratio > Auto > select the desired record size > OK > Special Features > Different Size Originals >
select "Same Width" or "Different Width" > OK > Done > Resolution > select "300 x 300 dpi" or "600 x 600 dpi" > OK].
14.2.10.2.4 Machine fails to automatically select appropriate zoom ratio based on size of originals and record size/Message "Fax TX is not
possible with this mode set." is displayed: When using different size originals mode in FAX transmission
0010-0055
iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / / iR3530 / / / /
[ Case in the field ]
Description
In the field, the symptom occurred because the direct sending was set. When setting machine to automatically select the appropriate zoom ratio based on the
size of originals and the record size in the different size originals mode, it is impossible to set the direct sending method or the manual sending method
simultaneously. Additionally, resolution has to be set to 300 x 300dpi or 600 x 600dpi.
14.2.10.2.5 How to change number of characters extracted for document (file) name when sending in PDF(OCR) mode: FAX transmission
0010-0057
iR2270 / iR2870 / iR3570 / iR4570 / / / / / iR2230 / / / iR3530 / / / /
[ Manual-related ]
Description
In user mode [Communications Settings > TX Settings under Common Settings > PDF(OCR) Settings > Num. of Char. for Doc Name Setting], change the
number of characters extracted for the document name between 1 and 24 characters (default: 24 characters).