manualshive.com logo in svg

Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 85 / 874

Поделиться
Скачать
Canon imageRUNNER ADVANCE 9070 PRO series Скачать руководство пользователя страница 85

3-59

3

E 

code

Detailed 

code

Occurance 

area

Items

Description

E025 -04B0

-05

Title

Error in Bk Toner Container Reciprocation HP Sensor 

(PS8)

Description 

of detection

Unable to detect the change in the Release Holder Shift 

Cam HP Sensor status (OFF -> ON) when closing the 

cap so that open and close status of the cap cannot be 

judged.

Measures

Identify the cause of the error whether it is due to 

mechanical problem to open/close the cap or problem at 

the Release Holder Shift Cam HP Sensor side. 

1. Check if the Release Holder Shift Cam HP Sensor is 

soiled and the installation of the sensor. 

2. Drive the Hopper Unit a little with the Toner Container 

Removing Tool, and check the service mode (COPIER> 

I/O> DC-CON> P052 bit12) to see that the output 

value of the sensor is changed. 

Since it is difficult to check the screen while driving it, 

repeat the operation to drive it a little and check the 

screen until the value is changed. 

If it is normal, the output value of the sensor is 

changed when opening/closing the cap. Even if it is 

normal, be sure to perform step 4 and later steps. 

2-1. If there is an error in drive of the Hopper Unit, 

check the drive system such as gears. 

If it is damaged, replace the Set-on Drive Unit 

and then perform step 4 and later steps. 

2-2. When the output value of the sensor is not 

changed although the Hopper Unit is driven, 

check the Sensor Harness (to see if the harness 

is caught, disconnected or physically removed). 

If there is no problem, replace the sensor. After 

checking the output value in step 2, perform step 

4 and later steps. 

3. If the problem is not solved by replacing the foregoing 

parts, replace the Hopper Driver PCB (UN3) and then 

perform step 4 and later steps. 

4. Clear the error in service mode (COPIER> 

FUNCTION> CLEAR> ERR), and then turn OFF and 

then ON the main power. 

5. Replace the toner (reinstall the removed Toner 

Container) at least once in user mode (Adjustment/

Maintenance> Replace Specified Toner), and check 

that toner replacement can be performed normally.

E 

code

Detailed 

code

Occurance 

area

Items

Description

E025 -04C0

-05

Title

Error in Bk Toner Insertion Inlet Cover Sensor (PS7)

Description 

of detection

Unable to detect opening of the Toner Insertion Inlet 

Cover when removing the Toner Container.

Measures

Identify the cause of the error whether it is due to link 

mechanism to open the Toner Insertion Inlet Cover or 

problem at the Toner Insertion Inlet Cover Sensor side.

1. Perform the user mode (Adjustment/Maintenance> 

Replace Specified Toner) to check if the Toner 

Insertion Inlet Cover opens normally (damage, slide of 

shaft area, etc.). 

2. Check if the Toner Insertion Inlet Cover Sensor is 

soiled and the installation of the sensor. 

3. Check the service mode (COPIER> I/O> DC-CON> 

P051 bit3) to see that the output value of the Toner 

Insertion Inlet Cover Sensor is changed normally when 

opening/closing the Toner Insertion Inlet Cover. 

If it is normal, the value becomes 0 by driving the 

Hopper Unit with the Toner Container Removing Tool 

and opening the Toner Insertion Inlet Cover. When 

closing the Toner Insertion Inlet Cover by hand, it 

becomes 1.

3-1. When the Toner Insertion Inlet Cover is not 

opened although the Hopper Unit is driven, check 

the drive system from upstream (Hopper Unit -> 

link mechanism of Hopper Tray -> Toner Insertion 

Inlet Cover Unit). 

If it is damaged, replace the damaged part and 

then perform step 5 and later steps. 

3-2. When the output value is not changed normally 

although the Toner Insertion Inlet Cover can 

be opened/closed, check the Sensor Harness 

(to see if the harness is caught, disconnected 

or physically removed, *including the Relay 

Connector). 

If there is no problem, replace the sensor. After 

checking the output value in step 3, perform step 

5 and later steps. 

4. If the problem is not solved by replacing the foregoing 

parts, replace the Hopper Driver PCB (UN3) and then 

perform step 5 and later steps. 

5. Clear the error in service mode (COPIER> 

FUNCTION> CLEAR> ERR), and then turn OFF and 

then ON the main power. 

6. Replace the toner (reinstall the removed Toner 

Container) at least once in user mode (Adjustment/

Maintenance> Replace Specified Toner), and check 

that toner replacement can be performed normally.

Содержание imageRUNNER ADVANCE 9070 PRO series











































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов