Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 631 / 874

5-403
5
COPIER> OPTION> USER
EXP-CRYP Confdntial encrypt ON/OFF:add book exprt
Lv.1 Details To set whether to encrypt the confidential part (password part) in the
Address Book when exporting the Address Book and device settings
via RUI.
When 0 is set, the confidential part in the Address Book is exported
without encryption.
Use case When there is a need to export password without encryption because
of operation and tool
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Be sure not to allow the user to execute export without encryption
because of security concern.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
SLEEP1SW Power supply when shifting to SLEEP1
Lv.1 Details When shifting to SLEEP1 mode, the power stops to be supplied, so it
takes time to activate after a job is received.
When 1 is set, the power keeps to be supplied even after shifting to
SLEEP1 mode, so the activation of job processing becomes earlier.
Use case Upon user’s request (when job processing after shifting to SLEEP1
is slow)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
EZY-SCRP ON/OFF of secure print simple auth
Lv.1 Details To set whether to conduct secure print simple authentication.
When 1 is set, secured print, encryption secured print and inbox print
are received, but the normal print jobs are canceled.
If the password "3758211" is entered at job sending, authentication
by entering the password on the Control Panel is not required. If the
password is not entered at job sending, authentication by entering
the password on the Control Panel is necessary at job output.
In addition, the following selection is added as auto deletion time of
secure job: 10 minutes, 20 minutes, 30 minutes
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
COPIER> OPTION> USER
DMN-MTCH ON/OFF of secure print domain judgment
Lv.1 Details To set whether to display only the job which matches the domain in
the "My Job Status" screen of the secure print.
When 1 is set, only the job which matches the user name and
domain name is displayed in the "My Job Status" screen, so the job
which does not match the domain is not displayed.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
TRY-STP Set of suspension at full Finisher Tray
Lv.2 Details To set whether to suspend or continue output when the full Finisher
Tray is detected.
Use case Upon user's request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: At detection of full tray, 1: Detection of height only
Default value 0
T-5-73