Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 585 / 874

5-357
5
COPIER> OPTION> IMG-MCON
REGM-SEL Adj of fine-line density correction
Lv.2 Details To adjust the line and text density which is set in the thin line density
adjustment UI.
Set 4 if density is too low even 2 is set in the thin line
density adjustment UI.
Set 0 if density is too high even though -2 is set in the thin line
density adjustment UI.
Use case When line and text adjusted by thin line density adjustment is too
dark or too light in the case of 1200 dpi print
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 4
Default value 2
Supplement/memo REGM-SEL: REos GaMma SELect
L-PWR-SW Adjustment of thin line width
Lv.2 Details To adjust the line width of thin lines.
As the value is larger, lines become thicker.
Use case When enhancing the reproducibility of thin lines
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Execute Auto Adjust Gradation (Full Adjust).
Display/adj/set range 0 to 3
0: No adjustment
1: 10%
2: 20%
3: 30%
Default value 2
SCR-SW Set of low screen ruling dither
Lv.1 Details To set the dithering method for low screen ruling.
When changing the value, confirm the change by setting “1: Low
screen ruling” in COPIER> TEST> PG> TXPH.
Use case Upon user’s request (Dot dithering is used)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Execute Auto Adjust Gradation (Full Adjust).
Display/adj/set range 0 to 1
0: Line dithering, 1: Dot dithering
Default value 0
Related service mode COPIER> TEST> PG> TXPH
COPIER> OPTION> IMG-MCON
ERS-SEL1 Set 1200 dpi ERS process:PS Expnsn Kit
Lv.1 Details To change the ERS processing when the hue of patterned graphics
is changed according to phase in the case of making 1200-dpi output
with the PS Expansion Kit installed.
The processing is changed only for graphics and images, and ERS
weighting processing is performed to characters even if the setting is
changed.
Set 1 when the aforementioned symptom occurs.
Set 3 if the proportion of small characters is distorted after 1 is set.
Set 5 if the color of graphics is not stabilized after 1 or 3 is set. In this
setting, however, a thin line of a single line disappears.
Use case When the hue is changed according to phase when making 1200-dpi
output
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 7
The following processing are performed to graphics and images
respectively:
0: Max skipping, simple skipping
1: ERS (average), simple skipping
2: ERS (average), ERS (average)
3: ERS (weighting), simple skipping
4: ERS (weighting), ERS (weighting)
5: Simple skipping, simple skipping
6, 7: Not used
Appropriate target value 0
Default value
0
ERS-SEL2 Set 1200 dpi ERS process: print server
Lv.1 Details To change the ERS processing when the hue of patterned graphics
is changed according to phase in the case of making 1200-dpi output
through connection to the print server.
Set 1 when the aforementioned symptom occurs.
Set 3 if the proportion of small characters is distorted after 1 is set.
Set 5 if the color of graphics is not stabilized after 1 or 3 is set. In this
setting, however, a thin line of a single line disappears.
Use case When the hue is changed according to phase when making 1200-dpi
output
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 5
The following processing are performed to characters, graphics, and
images respectively:
0: ERS (weighting), Max skipping, simple skipping
1: ERS (average), ERS (average), simple skipping
2: ERS (average), ERS (average), ERS (average)
3: ERS (weighting), ERS (weighting), simple skipping
4: ERS (weighting), ERS (weighting), ERS (weighting)
5: ERS (weighting), simple skipping, simple skipping
Appropriate target value 0
Default value
0