manualshive.com logo in svg

Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 17 / 874

Поделиться
Скачать
Canon imageRUNNER ADVANCE 9070 PRO series Скачать руководство пользователя страница 17

2-5

2

Procedure of 

adjustment

1. Before Replacing

Perform the following operations. Be sure to get an approval from the user 

beforehand. 

1) Backup of the set/registered data

Use the Remote UI. 

Management Settings > Data Management > Import/Export

Target data:

•  Address List

•  Forwarding Settings

•  Settings/Registration

•  Web Access Favorites

•  Printer Settings

•  Paper Information

2) Printing the set/registered data

Use the service mode. 

(Lv.1) COPIER > FUNCTION > MISC-P > USER-PRT

List of the set/registered data which cannot be backed up is printed. 

2. After Replacing

1) HDD format

1-1) Start with the safe mode. (While pressing 2 and 8 keys 

simultaneously, turn ON the main power switch.)

1-2) Use SST to format all partitions. 

2) Downloading system software 

2-1) Use SST to download the system software (System, LANG, RUI 

and others).

3) Initializing the key, certificate and CA certificate

(Lv.2) COPIER > FUNCTION > CLEAR > CA-KEY

4) Turning OFF and ON the main power switch

5) Restoring the backup data

Use the Remote UI. 

Management Settings > Data Management > Import/Export

6) Resetting/registering the data

While referring to the list of set/registered data which was printed 

before replacement, reset/register the data.

7) When the user generates and adds the encryption key, certificate and/

or CA certificate, request the user to generate them again.

8) Executing “Auto Adjust Gradation (Full Adjust)”

Settings/Registration mode: Adjustment/Maintenance > Adjust Image 

Quality > Auto Adjust Gradation

T-2-8

Procedure of 

adjustment

Caution: When using the Card Reader and imageWARE 
Accounting Manager 
Card ID used for imageWARE Accounting Manager is stored in 
the HDD, so NSA collection control is not enabled after the HDD 
replacement. After the HDD is replaced, reinstall the card ID from 
imageWARE Accounting Manager using the following procedures. 

1) Go to COPIER > FUNCTION> INSTALL > CARD and enter 

the numerical value of the leading card which is used for 
Department ID. Then, press “OK” button.

(e.g.: If No.1 to No.1000 cards are used for Department ID, enter “1” 
of the leading card.)

2) After turning OFF and ON the main power switch, perform the 

following operations from Settings/Registration mode.

•  In Management Settings > User Management > Department 

ID Management > Page Totals, be sure that “ID00000001” to 
“ID00001000” are created.

•  Set the following: Preferences > Network > TCP / IP Settings 

> IPv4 Settings> IP Address Settings > IP Address, Gateway 
Address, Subnet Mask

•  In Management Settings > User Management> System 

Manager Information Settings> System Manager ID and System 
PIN, register any number for them. Then, turn OFF and ON the 
main power switch.

If “System Manager ID” and “System PIN” are not registered, “card 
registration to device” cannot be executed for the imageWARE 
Accounting Manager setting operation.

3) Download the card ID from imageWARE Accounting Manager to 

the Main Body again.

4) After downloading is completed, go to Management Settings 

> User Management > Department ID Management > Page 
Totals. Be sure that only the downloaded card ID is displayed. 

5) Print using the user card registered from imageWARE 

Accounting Manager. Be sure that the card information used 
for the target devices of imageWARE Accounting Manager is 
collected. 

T-2-9

Содержание imageRUNNER ADVANCE 9070 PRO series











































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов