manualshive.com logo in svg

Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 84 / 874

Поделиться
Скачать
Canon imageRUNNER ADVANCE 9070 PRO series Скачать руководство пользователя страница 84

3

3-58

E 

code

Detailed 

code

Occurance 

area

Items

Description

E025 -0410

-05

Title

Toner container sealing/release holder shift cam HP 

sensor timeout (Bk) error

Description 

of detection

HP sensor of release holder shift cam cannot detect 

within specified period of time.

Measures

1. Check the connection of the toner container drive 

motor (M7) harness. (Check whether the wire is not 

caught by parts.) Check the connection with the 

hopper driver PCB.

Motor side: J7107, J8041 PCB side: J1370

2. Check the connection between the release holder shift 

cam HP sensor (PS8) and the hopper driver PCB.

Sensor side: J7139, J8040 PCB side: J1340

3. Clean and replace the toner feed screw rotation 

sensor.

4. Replace the hopper/stirring supply motor.

5. Replace the hopper unit.

CAUTION:

As for Remedy 5, since it is difficult to identify the cause, 

it is recommended to replace the unit.

NOTE: After performing the above remedy work, go 

through the following to clear the error: COPIER> 

FUNCTION> CLEAR> ERR

E025 -0420

-05

Title

Toner container/toner container inserting inlet phase (Bk) 

error

Description 

of detection

When the power was turned on, it was detected that the 

toner container cap was opened (the release holder shift 

cam phase sensor was protected against light) AND the 

toner container inserting inlet cover was opened (the 

toner container inserting inlet cover open/close sensor 

was transmissive).

Measures

1. Close the toner container inserting inlet cover and turn 

OFF/ON the power.

2. Check the connection between the toner container 

inserting inlet cover open/close sensor (PS7) and the 

hopper driver PCB. (Connection of the connector, 

Shorting, Wire caught by parts)

Sensor side: J7138, J8115 PCB side: J1360

3. Check the connection between the release holder shift 

cam phase sensor (PS82) and the hopper driver PCB. 

(Connection of the connector, Shorting, Wire caught by 

parts)

Sensor side: J7154, J8041 PCB side: J1370

4. Replace the toner container inserting inlet cover open/

close sensor.

E 

code

Detailed 

code

Occurance 

area

Items

Description

E025 -04A0

-05

Title

Error in Bk Toner Container Reciprocation HP Sensor 

(PS8)

Description 

of detection

Unable to detect the change in the Release Holder Shift 

Cam HP Sensor status (ON -> OFF) when opening the 

cap so that open and close status of the cap cannot be 

judged.

Measures

Identify the cause of the error whether it is due to 

mechanical problem to open/close the cap or problem at 

the Release Holder Shift Cam HP Sensor side. 

1. Check if the Release Holder Shift Cam HP Sensor is 

soiled and the installation of the sensor. 

2. Drive the Hopper Unit a little with the Toner Container 

Removing Tool, and check the service mode (COPIER> 

I/O> DC-CON> P052 bit12) to see that the output 

value of the sensor is changed. 

Since it is difficult to check the screen while driving it, 

repeat the operation to drive it a little and check the 

screen until the value is changed. 

If it is normal, the output value of the sensor is 

changed when opening/closing the cap. Even if it is 

normal, be sure to perform step 4 and later steps. 

2-1. If there is an error in drive of the Hopper Unit, 

check the drive system such as gears. 

If it is damaged, replace the Set-on Drive Unit 

and then perform step 4 and later steps. 

2-2. When the output value of the sensor is not 

changed although the Hopper Unit is driven, 

check the Sensor Harness (to see if the harness 

is caught, disconnected or physically removed). 

If there is no problem, replace the sensor. After 

checking the output value in step 2, perform step 

4 and later steps. 

3. If the problem is not solved by replacing the foregoing 

parts, replace the Hopper Driver PCB (UN3) and then 

perform step 4 and later steps. 

4. Clear the error in service mode (COPIER> 

FUNCTION> CLEAR> ERR), and then turn OFF and 

then ON the main power. 

5. Replace the toner (reinstall the removed Toner 

Container) at least once in user mode (Adjustment/

Maintenance> Replace Specified Toner), and check 

that toner replacement can be performed normally.

Содержание imageRUNNER ADVANCE 9070 PRO series











































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов