Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 745 / 874

5-517
5
SORTER> ADJUST
RTR-UPA4 Adj Ppr Rtn Roll rise angle(A4): Fin-A1
Lv.1 Details To adjust the Paper Return Roller rise angle when processing is
performed to A4 size paper.
As the value is incremented by 1, the roller rise angle is increased by
1 degree.
Use case When misalignment occurs in A4 size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 44
Unit 1degree
Appropriate target value 1
RTR-UPB5 Adj Ppr Rtn Roll rise angle(B5): Fin-A1
Lv.1 Details To adjust the Paper Return Roller rise angle when processing is
performed to B5 size paper.
As the value is incremented by 1, the roller rise angle is increased by
1 degree.
Use case When misalignment occurs in B5 size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 44
Unit 1degree
Appropriate target value 1
RTR-UPLT Adj Ppr Rtn Roll rise angle(LTR):Fin-A1
Lv.1 Details To adjust the Paper Return Roller rise angle when processing is
performed to LTR size paper.
As the value is incremented by 1, the roller rise angle is increased by
1 degree.
Use case When misalignment occurs in LTR size buffer paper
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 1 to 44
Unit 1degree
Appropriate target value 1
PUNCH-SB Adj Punch Unit ppr swback amount: Fin-A1
Lv.1 Details To adjust the paper switchback amount in the high accuracy punch
mode of Finisher.
As the value is incremented by 1, the switchback amount is
increased by 1mm.
Use case When the punch accuracy deteriorates in the paper feed direction
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 2 to 4
Unit 1 mm
Appropriate target value 2
SORTER> ADJUST
ST-ALG1 Adj Stacker A4 size align pstn: Fin-B1
Lv.1 Details To adjust the A4 size paper alignment position.
As the value is incremented by 1, the travel length of the Alignment
Plate is increased by 0.42mm.
Use case When misalignment occurs in A4 size paper
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
-10 to 10
Unit 0.42 mm
Appropriate target value 0
Default value
0
ST-ALG2 Adj Stacker LTR size align pstn: Fin-B1
Lv.1 Details To adjust the LTR size paper alignment position.
As the value is incremented by 1, the travel length of the Alignment
Plate is increased by 0.42mm.
Use case When misalignment occurs in LTR size paper
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
-10 to 10
Unit 0.42 mm
Appropriate target value 0
Default value
0
STP-F3 Adj A4R frt stpl pstn (<45 deg): Fin-B1
Lv.1 Details To adjust the one front staple position on the A4R size paper.
As the value is incremented by 1, the staple position moves to the
rear side by 0.49mm.
Use case When misalignment occurs at the front staple position on A4R size
paper
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
-6 to 6
Unit 0.49 mm
Appropriate target value 0
Default value
0
STP-F4 Adj LTRR frt stpl pstn (<45 deg): Fin-B1
Lv.1 Details To adjust the one front staple position on the LTRR size paper.
As the value is incremented by 1, the staple position moves to the
rear side by 0.49mm.
Use case When misalignment occurs at the front staple position on LTRR size
paper
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
-6 to 6
Unit 0.49 mm
Appropriate target value 0
Default value
0