manualshive.com logo in svg

Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 195 / 874

Поделиться
Скачать
Canon imageRUNNER ADVANCE 9070 PRO series Скачать руководство пользователя страница 195

3-169

3

Alarm Code

Title

A. movement /B. cause /C. measures

06 - 0004 Caution alarm for increase of 

pressure belt torque

Movement: None

Cause: The pressure belt torque increased.

Measures: Replace the pressure belt.

33 - 0010 Stream reading fan alarm

A failure occurred in the fan at the time of job 

completion.

33 - 0022 Read motor cooling fan alarm A failure occurred in the fan during job operation.
33 - 0023 Optical unit (DADF) cooling 

fan alarm

A failure occurred in the fan during job operation.

33 - 0025 Optical unit (reader) cooling 

fan alarm

A failure occurred in the fan during job operation.

34 - 0001 Image position correction 

patch detection alarm 1

Movement: None

Cause:

The detection data of the average value of the image 

position correction patch pattern has exceeded the 

permitted range.

•  Scraches on the ITB

•  Failure of the photosensitive drum

•  Noise due to contact failure of the ITB guide (The 

ITB unit is not installed correctly.)

Measures:

1. Check whether the color image is formed correctly 

for 4 colors.

a. Perform test print in the following condition.

COPIER>TEST>PG>TYPE: 5

Output one sheet for each color in the paper of 

LTR/A4/A3 size (more than 290mm in a horizontal 

scanning direction).

b. Check the following points.

•  Check whether the image is formed in the printing 

field except a margin. Check whether the image 

density is not low.

•  Check whether an unexpected image is not formed.

If a correct image is not formed, check the following 

points.

•  Developing assembly: Check whether dirt is not 

applied to the developing.

•  Drum: Check whether dirt is not applied to the drum. 

Check whether there are no scratches on the drum.

•  ITB cleaning unit: Check whether an ITB cleaning 

failure has not occurred. (Check whether the 

previous image does not remain.)

•  Check whether there are a lot of scratches or dents 

on the ITB or not.

Based on the checking results and frequency 

of occurrence of the alarm, make a judgment of 

whether or not to replace the corresponding parts.

Alarm Code

Title

A. movement /B. cause /C. measures

34 - 0002 Image position correction 

patch detection alarm 2

Movement: None

Cause:

The image position correction patch pattern cannot be 

detected at all.

•  Failure of the patch sensor

•  Failure of the shutter

•  Image failure

1. 1. Check whether the color image is formed correctly 

for 4 colors.

a. Perform test print in the following condition.

COPIER>TEST>PG>TYPE: 5

Output one sheet for each color in the paper of 

LTR/A4/A3 size (more than 290mm in a horizontal 

scanning direction).

b. Check the following points.

•  Check whether the image is formed in the printing 

field except a margin. Check whether the image 

density is not low.

•  Check whether an unexpected image is not formed.

If a correct image is not formed, take measures to be 

taken for prevention of an image failure. (Check the 

developing assembly and drum unit.)

•  Developing assembly: Check whether dirt is not 

applied to the developing.

•  Drum: Check whether dirt is not applied to the drum. 

Check whether there are no scratches on the drum.

•  ITB cleaning unit: Check whether an ITB cleaning 

failure has not occurred. (Check whether the 

previous image does not remain.)

•  Check whether there are a lot of scratches or dents 

on the ITB or not.

Based on the checking results and frequency 

of occurrence of the alarm, make a judgment of 

whether or not to replace the corresponding parts. 

2. Damage or dirt of/on the patch sensor

a. Check whether the shutter of the patch sensor 

operates correctly.

b. Check whether dirt is not applied to the patch sensor.

If dirt is applied, clean the sensor surface 

with alcohol. After cleaning, execute patch 

light intensity correction and base correction 

(COPIER>FUNCTION>MISC-P>PT-LPADJ).

c. If the problem is not eliminated even after cleaning, 

replace the registration patch sensor unit.

d. Check whether shorting has occurred to the patch 

sensor harness.

If it occurred, replace both of the harness and the DC 

controller interface PCB. (It is necessary to replace 

the PCB because the DC controller interface PCB 

burns when shorting occurs.)

Содержание imageRUNNER ADVANCE 9070 PRO series











































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов