Canon imageRUNNER ADVANCE 9070 PRO series Скачать руководство пользователя страница 524

Страница: 524 / 874

5-296

COPIER> FUNCTION> CLEAR

MMI

Clear of user mode setting value

Lv.1 Details

To clear the user mode setting values (excluding values for Control

Panel, common settings, and FAX).

• Common Settings

• Timer Settings

• Adjustment/Cleaning

• Report Settings

• System Settings

• Copy Settings

• Communications Settings

• Printer Settings

Use case

When clearing various setting values of user mode

Adj/set/operate method 1) Select the item, and then press OK key.

2) Turn OFF/ON the main power switch.

Caution

The setting value is cleared after the main power switch is turned

OFF/ON.

MN-CON

RAM clear of MNCON PCB SRAM Board

Lv.1 Details

To clear the RAM data of the Main Controller PCB SRAM Board.

All data on the SRAM Board is initialized.

Use case

When clearing the RAM data of the Main Controller PCB SRAM

Board

Adj/set/operate method 1) Select the item, and then press OK key.

The machine is automatically rebooted.

2) Turn OFF/ON the main power switch.

Caution

• Inform the user that all images in Inbox will be deleted and get

approval for it.

• Since the file management information is initialized, images on the

HDD cannot be read.

• Before execution of this item, be sure to output the service mode

setting values by P-PRINT. After execution, enter necessary

setting values.

• The RAM data is cleared after the main power switch is turned

OFF/ON.

Related service mode

COPIER> FUNCTION> MISC-P> P-PRINT

CARD

Clear of card ID-related data

Lv.1 Details

To clear the data related to the card ID (department).

Use case

When clearing the data related to the card ID

Adj/set/operate method 1) Select the item, and then press OK key.

2) Turn OFF/ON the main power switch.

Caution

The value is cleared after the main power switch is turned OFF/ON.

W-TN-CLR

Clear of waste toner full alarm & error

Lv.1 Details

To clear the Waste Toner Container full alarm/error.

Use case

When replacing the Waste Toner Container

Related service mode

COPIER> ADJUST> MISC> WT-FL-LM

COPIER> FUNCTION> CLEAR

CA-KEY

Deletion of CA certificate and key pair

Lv.2 Details

To simultaneously delete the CA certificate and key pair which are

additionally registered by the user.

Use case

When a service person replaces/discards the device

Adj/set/operate method 1) Select the item, and then press OK key.

2) Check that OK is displayed.

3) Turn OFF/ON the main power switch.

Caution

• Unless this item is executed at the time of replacement/discard of

the device, the CA certificate and key pair which are additionally

registered by the user remain in the HDD, which is a problem in

terms of security.

• Do not execute this item carelessly because the CA certificate

and key pair which are additionally registered are deleted when

it is executed. If they are deleted mistakenly, they need to be

again registered by the user. If no CA certificate and key pair are

additionally registered, the machine condition becomes the same

as the one at the time of factory shipment.

• When NG is displayed in 2), there is a possibility that deletion

was not executed. In this case, surely execute the deletion by

initializing the HDD, etc.

Display/adj/set range

At normal termination: OK, At abnormal termination: NG

Supplement/memo

• The CA certificate is used in the MEAP application with E-RDS

and SSL client connection, and the key pair is used in the SSL

function of IPP, RUI and MEAP.

• When the main power switch is turned OFF/ON, the CA certificate

and key pair which were registered at the time of factory shipment

are decompressed from the archive (/BOOTDEV/KCMNG), and

become available in the E-RDS/SSL function.

ERDS-DAT

Initialization of E-RDS SRAM data

Lv.1 Details

To initialize the SCM value of the Embedded-RDS stored in the

SRAM.

SCM values are ON/OFF of E-RDS, server’s port number, server’s

SOAP URL, and communication schedule with the server (how often

the data is acquired), etc.

The value set by COPIER> FUNCTION> INSTALL> E-RDS, RGW-

PORT, RGW-ADR, COM-LOG is cleared.

Use case

When upgrading the Bootable in the E-RDS environment

Adj/set/operate method Select the item, and then press OK key.
Caution

The method of using the SRAM in E-RDS differs depending on the

Bootable version. Therefore, unless the SRAM data is cleared at the

time of version upgrade, data inconsistency occurs.

Display/adj/set range

At normal termination: OK, At abnormal termination: NG

Related service mode

COPIER> FUNCTION> INSTALL> E-RDS, RGW-PORT, RGW-ADR,

COM-LOG

Содержание imageRUNNER ADVANCE 9070 PRO series











































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание imageRUNNER ADVANCE 9070 PRO series

Отзывы:

Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 524 / 874

Результаты поиска

Содержание imageRUNNER ADVANCE 9070 PRO series

Отзывы: