Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 591 / 874

5-363
5
COPIER> OPTION> FEED-SW
DK1-TURN ON/OFF Right Deck Pickup Roll last rotn
Lv.1 Details To set whether to execute last rotation of the Pickup Roller on the
Right Deck for 50 msec after completion of job.
As the usage is extended, a part of the Separation Roller engaged
with the Pickup Roller becomes worn and the roller stops rotation.
As a result of that, jam may occur. By rotating the Pickup Roller after
completion of job, it can reduce wear of the Separation Roller.
Use case • When frequency of use is relatively low
• When pickup jam tends to occur
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK2-TURN, DK3-TURN, DK4-
TURN, DK5-TURN, DK6-TURN, DK7-TURN
DK5-TURN ON/OFF M-Deck (upr) Pickup Rol last rotn
Lv.1 Details To set whether to execute last rotation of the Pickup Roller on the
Multi Deck (Upper) for 50 msec after completion of job.
As the usage is extended, a part of the Separation Roller engaged
with the Pickup Roller becomes worn and the roller stops rotation.
As a result of that, jam may occur. By rotating the Pickup Roller after
completion of job, it can reduce wear of the Separation Roller.
Use case • When frequency of use is relatively low
• When pickup jam tends to occur
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK1-TURN, DK2-TURN, DK3-
TURN, DK4-TURN, DK6-TURN, DK7-TURN
DK6-TURN ON/OFF M-Deck (Mid) Pickup Rol last rotn
Lv.1 Details To set whether to execute last rotation of the Pickup Roller on the
Multi Deck (Middle) for 50 msec after completion of job.
As the usage is extended, part of the Separation Roller engaged with
the Pickup Roller become worn and the roller stops the rotation. As
a result of that, jam may occur. By rotating the Pickup Roller after
completion of job, it can reduce wear of the Separation Roller.
Use case • When frequency of use is relatively low
• When pickup jam tends to occur
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK1-TURN, DK2-TURN, DK3-
TURN, DK4-TURN, DK5-TURN, DK7-TURN
COPIER> OPTION> FEED-SW
DK7-TURN ON/OFF M-Deck (Low) Pickup Rol last rotn
Lv.1 Details To set whether to execute last rotation of the Pickup Roller on the
Multi Deck (Lower) for 50 msec after completion of job.
As the usage is extended, a part of the Separation Roller engaged
with the Pickup Roller becomes worn and the roller stops rotation.
As a result of that, jam may occur. By rotating the Pickup Roller after
completion of job, it can reduce wear of the Separation Roller.
Use case • When frequency of use is relatively low
• When pickup jam tends to occur
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK1-TURN, DK2-TURN, DK3-
TURN, DK4-TURN, DK5-TURN, DK6-TURN
DK1-AIR ON/OFF of PDF Deck Lite air assist
Lv.1 Details To set ON/OFF of the POD Deck Lite air assist.
In the initial settings, the air assist is OFF for plain paper or heavy
paper, and ON for coated paper, texture paper, heavy paper 2 to 5,
OHT, etc.
When a jam or double feed error frequently occurs with plain paper,
etc., set the value to 1. When the transfer performance is low with
coated paper, texture paper, etc., set the value to 2.
Use case • When a jam or double feed error frequently occurs with plain
paper or heavy paper 1
• When the transfer performance is low with coated paper, texture
paper, etc.
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 2
0: Initial setting, 1: ON, 2: OFF
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK2-AIR, DK3-AIR, DK4-AIR