Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 470 / 874

5
5-242
COPIER> ADJUST> FEED-ADJ
ADJ-C2 Left Deck write start pstn in horz scan
Lv.1 Details To adjust the image write start position in the horizontal scanning
direction when feeding paper from the Left Deck (paper width is
within 320 mm.)
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution If the paper width exceeds 320 mm, execute mechanical adjustment.
Display/adj/set range -100 to 100
Unit 0.1 mm
Default value 0
ADJ-C3 Cassette 3 write start pstn in horz scan
Lv.1 Details To adjust the image write start position in the horizontal scanning
direction when feeding paper from the Cassette 3 (paper width is
within 320 mm.)
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution If the paper width exceeds 320 mm, execute mechanical adjustment.
Display/adj/set range -100 to 100
Unit 0.1 mm
Default value 0
COPIER> ADJUST> FEED-ADJ
ADJ-C4 Cassette 4 write start pstn in horz scan
Lv.1 Details To adjust the image write start position in the horizontal scanning
direction when feeding paper from the Cassette 4 (paper width is
within 320 mm.)
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution If the paper width exceeds 320 mm, execute mechanical adjustment.
Display/adj/set range -100 to 100
Unit 0.1 mm
Default value 0
ADJ-MF Write start pstn in horz scan: MP tray
Lv.1 Details To adjust the image write start position in the horizontal scanning
direction when feeding paper from the Multi-purpose Tray (paper
width is within 320 mm.)
As the value is incremented by 1, the margin on the left edge of
paper is increased by 0.1 mm.
+: Left margin becomes larger. (An image moves to the right.)
-: Left margin becomes smaller. (An image moves to the left.)
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case When replacing the DC Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution If the paper width exceeds 320 mm, execute mechanical adjustment.
Display/adj/set range -100 to 100
Unit 0.1 mm
Default value 0