Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 562 / 874

5
5-334
COPIER> OPTION> FNC-SW
MIB-NVTA RFC-compatible character stringMIB write
Lv.1 Details As default, MIB object which NVT-ASCII can be written exists in
order to link with LUI entry value. This violates RFC order, so a
problem like garbled 2-byte characters may occur in the SNMP
monitoring system, such as the 3rd vendor’s MPS.
Whether non-RFC-compatible character strings are written in MIB
can be set using this mode.
When 1 is set, only the character strings which are strictly compatible
with RFC are written. (Writing operation is executed from the SNMP
manager.) LUI is not linked.
Use case Upon user’s request (operation with RFC-compatible system)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 3
0: Compatible in a conventional manner, 1: RFC-compatible, 2 to 3:
Not used
Default value 0
Supplement/memo RFC: Document of internet-related technical standards
NVT-ASCII: Network Virtual Terminal-ASCII
MIB-EXT ON/OFF of link with Ex-Cont on network
Lv.1 Details To set whether to link with External Controller on network (Hewlett-
Packard Co.).
Use case When linking with External Controller of Hewlett-Packard Co.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: OFF, 1: ON, 2: Not used
Default value 0
T-5-59
■ DSPLY-SW
COPIER> OPTION> DSPLY-SW
UI-COPY Display/hide of copy screen
Lv.2 Details To set whether to display or hide the copy function.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
UI-BOX Display/hide of Inbox screen
Lv.2 Details To set whether to display or hide the Inbox function.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: No Inbox function (Storing is not available even with PDL to
Inbox.)
1: Inbox function is active
2: Inbox function is active (with limitation; Storing is available with
PDL to Inbox despite no display on the Control Panel/remote UI)
Default value 1
Related user mode Preferences> Display Settings> Store Location Display Settings>
Mail Box
The setting value is changed to 2 when turning OFF the foregoing
user mode, and the value is changed to 1 when turning ON the mode
at power-off/on.
As the setting value of this service mode is changed, the setting
value of the foregoing user mode is also changed.
UI-SEND Display/hide of send screen
Lv.2 Details To set whether to display or hide the SEND function.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1
UI-FAX Display/hide of FAX screen
Lv.2 Details To set whether to display or hide the FAX function.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 1