Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 434 / 874

5
5-206
COPIER> ADJUST> DENS
CONT-C Toner Density Sensor (C) control voltage
Lv.1 Details To enter the density detection control voltage of the Toner Density
Sensor (C).
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case When the backup data is cleared by RAM clear, etc.
Adj/set/operate method Enter the setting value, and then press OK key.
Caution
After the setting value is changed, write the changed value in the
service label.
Display/adj/set range 0 to 255
Appropriate target value 140 to 240
Related service mode
COPIER> DISPLAY> DENS> CONT-C
CONT-K Toner Density Sensor(Bk) control voltage
Lv.1 Details To enter the density detection control voltage of the Toner Density
Sensor (Bk).
When replacing the DC Controller PCB/clearing RAM data, enter the
value of service label.
Use case When the backup data is cleared by RAM clear, etc.
Adj/set/operate method Enter the setting value, and then press OK key.
Caution
After the setting value is changed, write the changed value in the
service label.
Display/adj/set range 0 to 255
Appropriate target value 140 to 240
Related service mode
COPIER> DISPLAY> DENS> CONT-K
T-5-34
■ BLANK
COPIER> ADJUST> BLANK
BLANK-T Adjustment of leading edge margin
Lv.1 Details To adjust the margin on the leading edge of paper.
As the value is incremented by 1, the margin is increased toward the
center of the paper by 1 pixel (0.0423 mm).
Use case • When reducing the margin upon user’s request
• When enlarging the margin for transfer separation/fixing separation
Adj/set/operate method Enter the setting value, and then press OK key.
Caution
Do not use this at the normal service.
Display/adj/set range 0 to 1000
Unit 1 pixel
Appropriate target value 29
Default value
29
BLANK-L Adjustment of left edge margin
Lv.1 Details To adjust the margin on the left edge of paper.
As the value is incremented by 1, the margin is increased toward the
center of the paper by 1 pixel (0.0423 mm).
Use case • When reducing the margin upon user’s request
• When enlarging the margin for transfer separation/fixing separation
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1000
Unit 1 pixel
Appropriate target value 29
Default value
29
BLANK-R Adjustment of right edge margin
Lv.1 Details To adjust the margin on the right edge of paper.
As the value is incremented by 1, the margin is increased toward the
center of the paper by 1 pixel (0.0423 mm).
Use case • When reducing the margin upon user’s request
• When enlarging the margin for transfer separation/fixing separation
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1000
Unit 1 pixel
Appropriate target value 29
Default value
29