Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 626 / 874

5
5-398
COPIER> OPTION> USER
TNRB-SW Setting of Toner Cntner counter display
Lv.2 Details To set whether to display or hide the Toner Container counter on the
Counter Check screen.
Use case When not showing the screen to users
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 2
0: Hide, 1: Display (Toner Container counter only), 2: Display (Toner
Container c ejection counter)
Default value Countries other than USA: 0, USA: 2
CLR-TIM Set of HDD Encry Kit data delete timing
Lv.2 Details To set the timing to completely delete the data when HDD Encryption
Kit is used.
Selecting 0 may reduce the job processing speed because page
data that has been already processed is deleted while the other job
is in process, causing overload to CPU and HDD access.
Selecting 1 improves the job processing speed because the process
is executed after a job is completed.
Use case Upon request to improve the job processing speed
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: During job process, 1: After the job is completed
Default value 0
JA-FORMT Display of job archive record format
Lv.2 Details To display the format of images for job archives recorded in jobs
other than FAX reception and IFAX reception, etc.
Whether the images processed by Packet JPEG are recorded in
Packet JPEG, or converted into Raster JPEG and then recorded is
displayed.
Only display is available in service mode. The setting is available
only in the MEAP applications which support job archiving.
Use case Upon user’s request
Display/adj/set range 0 to 1
0: Packet JPEG, 1: Raster JPEG
Default value 0
COPIER> OPTION> USER
HDCR-DSW Dis/hide of HDD complete delete ON/OFF
Lv.1 Details To set whether to display or hide “Hard Disk Data Complete Deletion”
in user mode.
With this setting, HDD data complete deletion function is available
with ON/OFF button on the screen.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Hide, 1: Display
Default value 0
Related user mode Management Settings > Data Management > HDD Data Complete
Deletion > Hard Disk Data Complete Deletion
DK1-ASST Set of P-Deck Air Heater control
Lv.1 Details To set the condition to turn on the Air Heater at the POD Deck Lite in
accordance with media/environment.
When the media is switched from non-coated paper to coated paper,
pickup operation does not start until the temperature of the Air
Heater reaches the specified temperature; thus, waiting time occurs.
By selecting 1, the Air Heater is ON only for the coated paper.
When the use environment is near the threshold for turning ON/OFF
the Air Heater, switching occurs frequently, which increases the wait
time. By selecting 2, the heater is always ON regardless of media
and environment.
Use case Upon user’s request (shorten the wait time)
Caution When selecting 2, be sure to receive approval from the user in
advance after explaining that there is a possibility that transfer
performance may decrease if humidity decreases.
Display/adj/set range 0 to 2
0: ON/OFF depending on the media/environment condition
1: ON only for the coated paper
2: Always ON (No environment/media-dependant)
Default value 0