manualshive.com logo in svg

Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 53 / 874

Поделиться
Скачать
Canon imageRUNNER ADVANCE 9070 PRO series Скачать руководство пользователя страница 53

3-27

3

E 

code

Detailed 

code

Occurance 

area

Items

Description

E013 -0001

-05

Title

Waste toner feed screw lock detection error

Description 

of detection

When the waste toner pipe screw lock SW (SW10) 

detected the lock status for 500 msec (100 msec x 5 

times) consecutively

Measures •  Pull out the Waste Toner Container. If it is full of toner, 

go to Step 1, 2, and 5.

•  If the Waste Toner Container is not full of toner, go to 

Step 1, 2, and 4.

•  If the Waste Toner Container is not full and the Waste 

Toner Pipe is not clogged with toner, go to Step 3 and 

4.

1. Remove the toner in the Waste Toner Pipe.

2. Replace the Waste Toner Full Sensor and the Waste 

Toner Container.

3. Replace the Waste Toner Screw Lock Detection 

Switch (SW10).

4. Replace the Waste Toner Drive Unit.

5. Reduce the value of timing setting for waste toner full 

alert display (COPIER> ADJUST> MISC> WT-FL-LM) 

by 1.

E 

code

Detailed 

code

Occurance 

area

Items

Description

E013 -0002

-05

Title

Waste toner full sensor offset adjustment error

Description 

of detection

The sensor sampling result is not within a specified 

range.

Measures •  If the waste toner bottle is full of toner (if toner is 

viewable at the height of the detection window), go to 

Step 1.

•  If the waste toner bottle is not full of toner (if toner is 

not viewable at the height of the detection window) 

and the detection window is stained with toner, go to 

Step 2.

•  If the toner bottle is new, go to Step 3 and 4.

•  If toner is not viewable at the height of the detection 

window and the window is not stained with toner while 

the waste toner bottle is not new, go to Step 3 and 4.

•  If no fault is found after checking mentioned above is 

performed and the connector of the waste toner full 

sensor (TS9) is inserted, go to Step 4.

1. Replace the waste toner bottle with new one. If new 

one is not available, remove toner in the waste toner 

bottle.

2. Replace the waste toner bottle with new one. If new 

one is not available, clean the detection window in the 

waste toner box.

3. Check the connection between the waste toner full 

sensor and the DC controller interface PCB. 

(Connection of the connector, Shorting, Wire caught 

by parts)

Sensor side: J7010, PCB side: J1261, J8149

4. Replace the waste toner full sensor.

Содержание imageRUNNER ADVANCE 9070 PRO series











































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов