Canon imageRUNNER ADVANCE 9070 PRO series Скачать руководство пользователя страница 557

Страница: 557 / 874

5-329

COPIER> OPTION> FNC-SW

CARD-RNG

Card number setting (department number)

Lv.2 Details

To set the number of cards (departments) that can be used with the

Card Reader.

Use case

When setting the number of cards (departments)

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

0 to 1000

Default value

1000

COMP-PRT

Img proc memory allocate at job conflict

Lv.2 Details

When making 2 or more composition prints (page number, number

of copies, stamp, date, booklet, watermark), memory for image

processing is allotted preferentially to print jobs.

Meanwhile, memory for image processing of scan/send and PDL

input becomes insufficient depending on the options and document

size, and these jobs might be unprocessed until composition prints

are finished.

If these jobs are interfered each other, image processing can be put

forward little by little by allotting memory equally to each job.

Use case

Upon user’s request

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

0 to 1

0: Print priority, 1: Equal allocation

Default value

ARCDT-SW

ON/OFF of ARCDAT control

Lv.1 Details

To set ON/OFF of ARCDAT control.

When “1: OFF” is set, the result of ARCDAT control is not reflected to

LUT.

When the hue variation occurs in the case of failure value displayed

in COPIER> DISPLAY> HT-C, turn OFF the ARCDAT control once

and check the hue.

If hue variation is alleviated, analyze the cause of ARCDAT control

error (developer, Patch Sensor, etc.).

Use case

When hue variation occurs

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Caution

Make sure to set “0: ON” again when ARCDAT control recovers.

Display/adj/set range

0 to 1

0: ON, 1: OFF

Default value

Related service mode

COPIER> DISPLAY> HT-C

COPIER> OPTION> FNC-SW

SJOB-CL

Set of scan job canceling by logout

Lv.1 Details

To set whether to cancel the scan job in operation by logout of the

user.

Use case

Upon user’s request

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Caution

The job in scanning operation cannot be canceled.

Display/adj/set range

0 to 1

0: Disabled, 1: Enabled

Default value

Supplement/memo

Scan job: A job after the scanning operation is completed.

USB-RCNT

Auto connect set at USB device disconnct

Lv.2 Details

To set to enable/disable automatic connection when the USB device

is disconnected.

With the setting to disable automatic connection, USB device cannot

be used if disconnecting and then connecting the USB device. To

enable connection again, the power needs to be turned OFF/ON.

With the setting to enable automatic connection, connect again after

disconnecting, and then connecting the USB device again.

Use case

Upon user’s request

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Caution

With the setting to enable automatic connection, disconnecting of 1

area makes automatic connection of all USB devices if there is USB

hub.

Display/adj/set range

0 to 1

0: No automatic connection, 1: Automatic connection

Default value

UNLMTBND

Over 400 binders print job support set

Lv.1 Details

To set whether to support print job that exceeds 400 binders.

With the setting to support, the machine makes print by sharing

binders according to job attribution.

Select “1: Not supported” if the user does not print job* with large

quantity of binders.

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

0 to 1

0: Automatic setting (when the print server is not connected: no

support; When the print server is connected: supported)

1: Not supported

Default value

Supplement/memo

* : A job that requires finishing (such as stapling) in one job. Does not

apply in the case of executing finishing with multiple sets of output.

Содержание imageRUNNER ADVANCE 9070 PRO series











































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание imageRUNNER ADVANCE 9070 PRO series

Отзывы:

Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 557 / 874

Результаты поиска

Содержание imageRUNNER ADVANCE 9070 PRO series

Отзывы: