Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 589 / 874

5-361
5
■ FEED-SW
COPIER> OPTION> FEED-SW
EVLP-SPD Envelope feeding speed setting
Lv.1 Details To set the envelope feeding speed.
By feeding an envelop at 1/2 speed (default) in the case of a high
humidity environment, the glue flap may adhere at the time of fixing.
As a result of that, the envelop may not be opened.
By setting to 1/1 speed, adhesion can be prevented, but fixing might
be deteriorated in a low humidity environment.
Use case When a glue flap of envelop adheres
Adj/set/operate method Enter the setting value, and then press OK key.
Caution
The fixing is deteriorated by setting 1/1 speed in a low humidity
environment.
Display/adj/set range 0 to 1
0: 1/2 speed, 1: 1/1 speed
Default value 0
DK5-REST Adj paper level for Multi Deck (Upper)
Lv.1 Details To adjust the threshold value for paper level to be determined as “no
paper” in Multi Deck (Upper).
When the setting value is increased for the case that too many
sheets are remained in the Deck, paper can be used almost to the
limit.
As the value is incremented by 1, the paper level decreases by
approx. 20 sheets.
Use case Upon user’s request
Caution The number of remaining papers varies according to the air-floatation
condition.
Display/adj/set range 0 to 5
Unit Approx. 20 sheets
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK6-REST, DK7-REST
DK6-REST Adj paper level for Multi Deck (Middle)
Lv.1 Details To adjust the threshold value for paper level to be determined as “no
paper” in Multi Deck (Middle).
When the setting value is increased for the case that too many
sheets are remained in the Deck, paper can be used almost to the
limit.
As the value is incremented by 1, the paper level decreases by
approx. 20 sheets.
Use case Upon user’s request
Caution The number of remaining papers varies according to the air-floatation
condition.
Display/adj/set range 0 to 5
Unit Approx. 20 sheets
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK5-REST, DK7-REST
COPIER> OPTION> FEED-SW
DK7-REST Adj paper level for Multi Deck (Lower)
Lv.1 Details To adjust the threshold value for paper level to be determined as “no
paper” in Multi Deck (Lower).
When the setting value is increased for the case that too many
sheets are remained in the Deck, paper can be used almost to the
limit.
As the value is incremented by 1, the paper level decreases by
approx. 20 sheets.
Use case Upon user’s request
Caution The number of remaining papers varies according to the air-floatation
condition.
Display/adj/set range 0 to 5
Unit Approx. 20 sheets
Default value 0
Related service mode COPIER> OPTION> FEED-SW> DK5-REST, DK6-REST
REG-SPD2 Speed adj of Rgst Roller: 1/2 speed
Lv.2 Details To adjust the Registration Roller speed when 1/2 speed is set for
heavy paper/transparency, etc.
Increase the value if the image at the leading edge of paper shrinks
in the feeding direction, and decrease the value if it expands.
Decrease the value if wavy-line image occurs.
If these symptoms are not alleviated after adjustment is made,
replace the Registration Roller.
Display/adj/set range -30 to 30
Unit 0.001
Default value 0
Related service mode COPIER> OPTION> FEED-SW> REG-SPD, REG-SPD3
REG-SPD3 Speed adj of Rgst Roller: 1/3 speed
Lv.2 Details To adjust the Registration Roller speed when 1/3 speed is set for
heavy paper/coated paper, etc.
Increase the value if the image at the leading edge of paper shrinks
in the feeding direction, and decrease the value if it expands.
Decrease the value if wavy-line image occurs.
If these symptoms are not alleviated after adjustment is made,
replace the Registration Roller.
Display/adj/set range -30 to 30
Unit 0.001
Default value 0
Related service mode COPIER> OPTION> FEED-SW> REG-SPD, REG-SPD2