Canon imageRUNNER ADVANCE 9070 PRO series Скачать руководство пользователя страница 598

Страница: 598 / 874

5-370

COPIER> OPTION> NETWORK

DHCP-81

ON/OFF IPaddress dynamic chng in DHCP-81

Lv.2 Details

To set ON/OFF for dynamic change of IP address by Option 81 of

DHCP.

Selecting OFF can prevent DHCP packet from including Option 12 or

Option 81 under the packet-monitoring network environment.

Selecting ON enables dynamic change of IP address by Option 81 of

DHCP in the case that the dynamic DNS setting is ON in user mode.

Use case

Upon user’s request

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Caution

Be sure to set ON for the dynamic DNS setting in user mode to

enable dynamic change of IP address.

Display/adj/set range

0 to 1

0: OFF, 1: ON

Default value

Supplement/memo

DHCP: Dynamic Host Configuration Protocol

IFX-CHIG

Set operation by IFAX recv mail content

Lv.1 Details

To set the number of characters for the IFAX received mail content,

so that the mail is not printed/forwarded when the characters in the

text is less than the number of specified characters.

This machine can output blank paper because some senders send

e-mail text consists of linefeed codes only. In such case, specify 2

(number of characters) so that there will be no output of blank paper.

In the case of specifying any number other than 0, header/footer is

printed/forwarded in 1 sheet only if the e-mail (body) text is less than

the specified value while no TIFF file is attached.

As the value is incremented by 1, the number of target characters in

e-mail body text is increased by 1 character.

Use case

When reducing print of blank paper due to e-mail received by IFAX.

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Caution

Be sure to get approval from the user by telling that there will be no

print of e-mail (body) text if the number of characters is less than the

specified value.

Display/adj/set range

0 to 999

0: E-mail (body) text is not ignored.

Unit

1 character

Default value

Supplement/memo

1 Japanese Kanji character is calculated as 2 bytes, and the control

codes (such as linefeed code, etc) are included in the number of

characters.

COPIER> OPTION> NETWORK

DNSTRANS

Setting of DNS transfer priority

Lv.1 Details

To set priority order of the protocol (IPv4/IPv6) to be used for DNS

query.

In the case of using both IPv6 and IPv4 while the DNS server

supports IPv4, it takes time because of timeout when executing DNS

query with priority on IPv6.

Giving priority on query by IPv4 can shorten the time.

Use case

When it takes time to execute DNS query with priority on IPv6

because the DNS server supports IPv4

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

0 to 1

0: IPv4, 1: IPv6

Default value

PROXYRES

Setting of proxy response to Windows

Lv.2 Details

To set whether to provide proxy response or return the device status

when an inquiry is received via Windows while the device is in sleep

mode.

Use case

When executing status response for query from Windows correctly

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

0 to 1

0: No proxy response, 1: Proxy response

Default value

WOLTRANS

Setting of sleep recovery protocol

Lv.1 Details

To set the protocol for recovery from sleep mode according to the

value of WOL (Wake On LAN) trans.

Reception of a specific network packet is one of the requirements for

the device to recover from sleep mode.

When the number of network protocols supported by the device

increases, the types of network packets which activate recovery from

sleep mode vary. However, there is a possibility that the existing

network protocol is actually used.

Select the type of network packet which activates recovery from

sleep mode according to the environment where the device is used.

Use case

When selecting protocol for sleep recovery

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

1 to 3

1: WSD and SNMP, 2: WSD and CPCA, 3: CPCA and SNMP

Default value

Содержание imageRUNNER ADVANCE 9070 PRO series











































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание imageRUNNER ADVANCE 9070 PRO series

Отзывы:

Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 598 / 874

Результаты поиска

Содержание imageRUNNER ADVANCE 9070 PRO series

Отзывы: