manualshive.com logo in svg

Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 774 / 874

Поделиться
Скачать
Canon imageRUNNER ADVANCE 9070 PRO series Скачать руководство пользователя страница 774

5

5-546

Test Print

How to check test print

 

■

16-Gradation (TYPE=4)

This test print can mainly check gradation performance, image fogging, white line, and 
density unevenness at the rear/front.

16-Gradation

(1) Gradation

If there is no 16-step density gradation, it may be caused by fault of drum unit or laser 
scanning system.

(2) Foggy image

If there is foggy image only at the white area as shown in the figure below, it may be 
caused by fault of drum unit or laser scanning system.

(3) Vertical white/black line

If there is white line in the image, it may be caused by fault of developing system.

(4) Density unevenness at the rear/front

If there is density unevenness at the rear/front, it may be caused by fault of drum unit, laser 
scanning system or transfer unit.

F-5-2

 

■

Full Area Half Tone (TYPE=5)

This test print can mainly check transfer failure, black line, white line, and pitch unevenness.

COLOR-M=1,  COLOR-Y/C/K=0

NOTE: 

•  Output by every developing color is available by specifying the developing color 

COLOR-Y/M/C/K in the following service mode: COPIER>TEST>PG

•  In the case of changing density of the test print, execute followings in service mode for 

density setting: TEST>PG>DENS-Y/M/C/K

(1) Transfer failure

If there is transfer failure, it may be caused by fault of transfer (intermediate transfer/
secondary transfer) unit.

(2) Horizontal unevenness

If there is horizontal unevenness, it may be caused by fault of photosensitive drum drive 
unit, drum ITB motor, or drum unit.

(3) Vertical unevenness

If there is vertical unevenness, it may be caused by soiled LDE lens, fault of drum unit, or 
deterioration of intermediate transfer belt.

F-5-3

Содержание imageRUNNER ADVANCE 9070 PRO series











































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов