Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 729 / 874

5-501
5
FEEDER
DISPLAY
FEEDER> DISPLAY
FEEDSIZE Dis of original size detected by DADF
Lv.1 Details To display the original size detected by DADF.
Adj/set/operate method N/A (Display only)
TRY-WIDE Distance of Original Width Detect Slider
Lv.1 Details To display the distance between the Original Width Detection Sliders.
Use case At original size detection error
Adj/set/operate method Check whether the value matching the slide position is displayed
when the Original Width Slider is moved to the specified size width
position.
Display/adj/set range 0 to approx. 2970
Unit 0.1 mm
SPSN-LMN Dis of Post-sprtn Sensr emission voltage
Lv.1 Details To display the light-emitting voltage value for the Post-separation
Sensor.
Use case When jams frequently occur
Adj/set/operate method N/A (Display only)
Display/adj/set range
0 to 255
Appropriate target value Approx. 113
SPSN-RCV Dis of Post-sprtn Sensr recv voltage
Lv.1 Details To display the light-receiving voltage value for the Post-separation
Sensor.
Use case When jams frequently occur
Adj/set/operate method Remove and insert the paper at the sensor position, and check the
value at presence/absence of the paper.
Display/adj/set range 0 to 255
Appropriate target value At the presence of paper: 123 or lower, At the absence of paper: 179
or higher
RDSN-LMN Dis of Lead Sensor emission voltage
Lv.1 Details To display the light-emitting voltage value for the Lead Sensor.
Use case When jams frequently occur
Adj/set/operate method N/A (Display only)
Display/adj/set range
0 to 255
Appropriate target value Approx. 113
FEEDER> DISPLAY
RDSN-RCV Display of Lead Sensor reception voltage
Lv.1 Details To display the light-receiving voltage value for the Lead Sensor.
Use case When jams frequently occur
Adj/set/operate method Remove and insert the paper at the sensor position, and check the
value at presence/absence of the paper.
Display/adj/set range 0 to 255
Appropriate target value At the presence of paper: 123 or lower, At the absence of paper: 179
or higher
DRSN-LMN Dis of Delivery Sensor emit voltg
Lv.1 Details To display the light-emitting voltage value for the Delivery Sensor.
Use case When jams frequently occur
Adj/set/operate method N/A (Display only)
Display/adj/set range
0 to 255
Appropriate target value Approx. 113
DRSN-RCV Dis of Delivery Sensor recv voltg
Lv.1 Details To display the light-receiving voltage value for the Delivery Sensor.
Use case When jams frequently occur
Adj/set/operate method Remove and insert the paper at the sensor position, and check the
value at presence/absence of the paper.
Display/adj/set range 0 to 255
Appropriate target value At the presence of paper: 123 or lower, At the absence of paper: 179
or higher
ADJUST
FEEDER> ADJUST
DOCST Adj of DADF img lead edge margin: front
Lv.1 Details To adjust the margin at the leading edge of the image for DADF
scanning.
Execute when the output image after DADF installation is dislocated.
Enter the value of service label when Reader Controller PCB is
replaced/RAM data is cleared.
As the value is incremented by 1, the margin at the leading edge of
the image is decreased by 0.1mm. (The image moves in the direction
of the leading edge of the sheet.)
Use case • When installing DADF
• When replacing the Reader Controller PCB/clearing RAM data
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
-50 to 50
Unit 0.1 mm
Default value 0
LA-SPEED Fine adj of DADF image magnifictn: front
T-5-93