Canon imageRUNNER ADVANCE 9070 PRO series Скачать руководство пользователя страница 621

Страница: 621 / 874

5-393

COPIER> OPTION> USER

CTM-S06

Set of password delete from export file

Lv.2 Details

To set to delete password for file transmission address from export

file.

With the setting to delete password, the password of file transmission

target is deleted at the time of export of address book data from

remote UI.

Use case

• Upon user’s request

• When avoiding information leak

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

0 to 1

0: Password is retained, 1: Password is deleted.

Default value

FREG-SW

Dis/hide of MEAP counter free rgst area

Lv.2 Details

To set whether to display or hide the free register area of MEAP

counter for SEND

Use case

At trouble analysis

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Caution

• Do not use this at the normal service.

• Take necessary action in accordance with the instructions from the

Quality Support Division.

Display/adj/set range

0 to 1

0: Hide, 1: Display

Default value

Supplement/memo

Individual count-up (counter advance) of MEAP application is

available in the free register area of MEAP counter.

IFAX-SZL

Setting of IFAX send size limit

Lv.2 Details

To set for restricting data size at the time of IFAX transmission that

does not go through the server.

With the setting to restrict the data size, there will be #830 error in

the case of sending data that exceeds the upper limit value.

In the case that the data goes through the server, the size of

transmission data is always restricted.

Use case

Upon user’s request

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

0 to 1

0: Limited, 1: Not limited (Restriction applies when data goes through

the server.)

Default value

Related user mode

Function Settings > Send > E-Mail/I-Fax Settings > Maximum Data

Size for Sending

Supplement/memo

Specify the upper limit value for transmission data size in user mode.

COPIER> OPTION> USER

IFAX-PGD

Set page split TX at IFAX Simple mode TX

Lv.2 Details

To set to enable/disable split-data transmission on a page basis in

the case that the transmission size in IFAX Simple mode exceeds

the upper limit value.

Use case

Upon user’s request

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Caution

In the case to enable split-data transmission, be sure to get approval

from the user by explaining the following:

• No guarantee for page order on the reception side

• There is a possibility of interruption of other received jobs

between pages

Display/adj/set range

0 to 1

0: Disabled, 1: Enabled

Default value

Related service mode

COPIER> OPTION> CLEANING> W-CLN-P

Related user mode

Function Settings > Send > E-Mail/I-Fax Settings > Maximum Data

Size for Sending

Supplement/memo

Specify the upper limit value for transmission data size in user mode.

MEAPSAFE

Setting of MEAP safe mode

Lv.2 Details

To set safe mode for MEAP platform.

MPSF is displayed on the Control Panel in safe mode.

In safe mode, MEAP application is stopped while just the system

application, which starts with initial state, is activated. This mode

enables obtaining log for cause analysis of MEAP failure.

Use case

Perform system recovery processing when MEAP platform fails to

be activated due to resource confliction between MEAP applications,

service registration or use order

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

0 to 1

0: Normal mode, 1: Safe mode

Default value

TRAY-FLL

Set of target tray for tray full notice

Lv.2 Details

To set the tray which is the target of an output tray full notification.

Use case

Upon user’s request

Adj/set/operate method 1) Enter the setting value, and then press OK key.

2) Turn OFF/ON the main power switch.

Display/adj/set range

0 to 1

0: All trays to which paper can be output, 1: All trays which are

specified as the dedicated trays

Default value

Содержание imageRUNNER ADVANCE 9070 PRO series











































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание imageRUNNER ADVANCE 9070 PRO series

Отзывы:

Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 621 / 874

Результаты поиска

Содержание imageRUNNER ADVANCE 9070 PRO series

Отзывы: