Canon imageRUNNER ADVANCE 9070 PRO series Скачать руководство пользователя страница 520

Страница: 520 / 874

5-292

■

FIXING

COPIER> FUNCTION> FIXING

NIP-CHK

Check of fixing nip width

Lv.1 Details

To check whether the fixing nip width is appropriate by printing.

If it is not appropriate, a fixing failure may occur.

Use case

• When replacing the fixing-related parts (Fixing Belt Unit, Pressure

Belt Unit)

• When a fixing failure occurs

Adj/set/operate method 1) Set A4/LTR plain paper (75 to 90g/m2) on the main unit deck.

2) Select the cassette, and then press OK key.

Printing is started, and a sheet is automatically stopped at the

fixing nip (10 seconds) and then is automatically delivered.

3) Measure the nip width.

Appropriate target value Center: 15.5 +/- 1mm, Edge: 17.5 +/- 1mm

FX-UHP

Exe of Fixing Belt displacement control

Lv.1 Details

To execute Fixing Belt displacement control and check the operation

result.

Use case

When checking Fixing Belt displacement control

Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range

During operation: ACTIVE, When operation finished normally: OK!,

At timeout: NG

Related service mode

COPIER> DISPLAY> ANALOG> FX-U-POS

FX-LHP

Exe of Pressure Belt displacement ctrl

Lv.1 Details

To execute Pressure Belt displacement control and check the

operation result.

Use case

When checking Pressure Belt displacement control

Adj/set/operate method Select the item, and then press OK key.
Display/adj/set range

During operation: ACTIVE, When operation finished normally: OK!,

At timeout: NG

Related service mode

COPIER> DISPLAY> ANALOG> FX-L-POS

T-5-52

■

PANEL

COPIER> FUNCTION> PANEL

LCD-CHK

Check of LCD Panel dot missing

Lv.1 Details

To check whether there is a missing dot on the LCD Panel of the

Control Panel.

Use case

When replacing the LCD Panel

Adj/set/operate method 1) Select the item, and then press OK key.

2) Check that the LCD Panel lights up in the order of white, black,

red, green and blue.

3) Press STOP key to terminate checking.

LED-CHK

Check of Control Panel LED

Lv.1 Details

To check whether the LED on the Control Panel lights up.

Use case

When replacing the LCD Panel

Adj/set/operate method 1) Select the item, and then press OK key.

2) Check that the LED lights up in the order.

3) Terminate checking with LED-OFF.

Related service mode

COPIER> FUNCTION> PANEL> LED-OFF

LED-OFF

End check of Control Panel LED

Lv.1 Details

To terminate checking of the LED on the Control Panel.

Use case

During execution of LED-CHK

Adj/set/operate method Select the item, and then press OK key.
Related service mode

COPIER> FUNCTION> PANEL> LED-CHK

KEY-CHK

Check of key entry

Lv.1 Details

To check the key input on the Control Panel.

Use case

When replacing the LCD Panel

Adj/set/operate method 1) Select the item and press the key on the Control Panel.

2) Check that the input value is displayed.

3) Release the selection to terminate checking.

TOUCHCHK

Adj of coordinate pstn of Touch Panel

Lv.1 Details

To adjust the coordinate position on the Touch Panel of the Control

Panel.

Use case

When replacing the LCD Panel

Adj/set/operate method 1) Select the item, and then press OK key.

2) Press the 9 “+” in sequence.

T-5-53

Содержание imageRUNNER ADVANCE 9070 PRO series











































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание imageRUNNER ADVANCE 9070 PRO series

Отзывы:

Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 520 / 874

Результаты поиска

Содержание imageRUNNER ADVANCE 9070 PRO series

Отзывы: