Canon imageRUNNER ADVANCE 9070 PRO series, Справочник по обслуживанию, Страница: 601 / 874

5-373
5
COPIER> OPTION> NETWORK
DDNSINTV Set of DDNS periodical update interval
Lv.1 Details DNS registration is executed only once at start-up with the current
iR, so the registered contents are deleted in an environment where
the DNS server settings are deleted at intervals.
To set the interval of DDNS periodical update for not deleting the
registered contents.
Use case When the DNS server settings are deleted at intervals
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 48
0: No periodical update, 1: 1-hour interval, 2: 2-hour interval, ..., 47:
47-hour interval, 48: 48-hour interval
Unit 1 hour
Default value 24
T-5-71
■ CUSTOM
COPIER> OPTION> CUSTOM
SC-L-CNT Set large paper jdgmt reference at scan
Lv.1 Details To set the judgment reference of the scan counter as to which to use
B4 or LTR to determine large size.
The threshold is determined by the combination with the setting of
B4-L-CNT.
SC-L-CNT=0, B4-L-CNT=0: paper exceeding B4 is determined as
large size, paper with B4 or smaller is determined as small size.
SC-L-CNT=0, B4-L-CNT=1: paper with B4 or larger is determined as
large size, paper smaller than B4 is determined as small size.
Use case As needed
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: B4 size, 1: LTR size
Default value 0
Related service mode COPIER> OPTION> USER> B4-L-CNT
SCANTYPE Switch of ADF + Reader
Lv.1 Details To switch to a different type ADF + Reader Unit.
Use case At installation
Display/adj/set range 0 to 1
0: Reverse Duplex ADF + Reader, 1: 1-Path Duplex ADF + Reader
Default value 0
ABK-TOOL Allow access from address book mntc tool
Lv.1 Details To set whether to accept import from the address book maintenance
tool.
Use case When executing import from the address book maintenance tool
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Disabled, 1: Enabled
Default value 0
Supplement/memo Address book maintenance tool: Tool provided from CMJ.
DEV-SP1 Device special settings 1
Lv.2 Details To execute the device special settings.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Change the setting value in accordance with the instructions from
the Quality Support Division.
Display/adj/set range 00000000 to 11111111
Unit bit
Default value 00000000