Canberra Lynx DSA, Руководство пользователя

Страница: 78 / 235

Chapter 4 System Setup
68 Lynx DSA User's Manual - 9240227J
Each site’s network requirements are unique. To connect your Lynx to your network
typically requires changing the Lynx’s settings to match you network’s requirements.
In order to make such changes, you will need to first connect to the Lynx using
Ethernet (preferred), USB, or RS-232. For performance reasons, reliability, and ease
of connectivity, the preferred connection method is Ethernet and therefore
emphasized in this document.
Establish an Ethernet connection between your computer and the Lynx DSA using
the Lynx’s default settings. The simplest and most reliable connection is Ethernet,
either direct using crossover cable, or indirect through a network. If needed, the
following references contain additional information on establishing such connection:
• The section Lynx Access – Default Settings on page 65 contains important
information on making the connection to the Lynx.
• The Communications Setup Appendix starting on page 150 contains
important information on setting up the computer’s Ethernet interface to
communicate with the Lynx.
The assumption is made here that your Lynx and your computer are now connected ,
either directly or through a network switch, and that your browser is displaying the
default Lynx Web Client application’s main page similar to the figure below.
Figure 36: Default Lynx Web Client Application Page