Canberra Lynx DSA, Руководство пользователя

Страница: 168 / 235

Chapter 5 Web-Based Operations
158 Lynx DSA User's Manual - 9240227J
Set your PC to utilize DHCP via its NIC
This setup is required when the PC and Lynx are connected to the main network
using the standard (straight-thru) CAT5 Ethernet cable, and the Lynx has been set for
DHCP operation.
Additionally, changes to the PC’s network adapter settings must be made through a
user with administrative privileges.
1. From the Control Panel, locate the Network Connections page. Accessing
the selection is operating-system dependent; in some cases the Network
Connections is selected directly from the Control Panel, while in others it is
accessed through the Change Adapter Settings link. Please refer to the
appropriate system documentation on changing network adapter settings if
necessary.
2. At the Network Connections page, locate and select the Network
Adapter icon corresponding to the network connection to be used with the
Lynx, then access its Properties settings. The adapter’s Properties are
typically accessed through the icon’s context menu (right-clicking after
having selected the icon), or by double-clicking then select Properties button.
3. At the adapter’s Properties dialog, locate and select the Internet Protocol
(TCP/IP) or Internet Protocol Version 4 (TCP/IPv4) , depending on
your operating system, then select
Properties
. See example below:
4. From the protocol’s Properties dialog select the
General Configuration
tab. Select the “Obtain an IP Address Automatically” button. Next, press OK
to accept this setting, then continue to press OK to accept and exit all setup
dialogs.