Canberra Lynx DSA Скачать руководство пользователя страница 234 | Manualshive

Страница: 234 / 235

background image

Software License

LICENSE

: Mirion Technologies, Inc. or its affiliates or subsidiaries (the "Company") grants Licensee a

limited, non-exclusive license to use the Software listed on the applicable invoice or purchase order, only

in object code form, on one computer or virtual machine. Licensee is not permitted to lease, loan, rent,

distribute or sublicense the Software or to use the Software in a time-sharing arrangement. No license is

granted in the human readable code of the Software (source code). The Software and accompanying

documentation (if any) may be copied only for backup or archive purposes as permitted by law.

Licensee may elect to receive ongoing support and/or maintenance, if offered by Company, upon payment

of Maintenance Fees. Maintenance Fees enable the Company to provide technical support, and work on

upgrades/bug fixes at Company’s discretion. Payment of the Maintenance Fee shall entitle Licensee to

receive such support or install upgrades/bug fixes as Company shall provide to its end-users.

This License Agreement does not apply to any third party software ("Other Software") that is licensed

separately under the terms of separate license agreements ("Other Software Terms"). Any terms of this

License Agreement that conflict with the Other Software Terms will not apply to the Other Software.

All rights not expressly granted by the Company to Licensee in this License Agreement are hereby

reserved by the Company. There are no implied rights.

TITLE; TRADE SECRETS

: Licensee acknowledges and agrees that ownership of, and title to, the

Software is held by the Company or its suppliers. Licensee shall not alter, modify or change the Software

or Related Materials or create derivative works based on the Software or Related Materials. Licensee

shall not (a) derive, discover or disclose, or attempt to derive, discover or disclose, by reverse compiling,

reverse engineering, reverse assembling or otherwise, any of Company's trade secrets, including without

limitation the Software (or the source code therefor); (b) disclose, disseminate, grant access to, copy,

reproduce, deliver, transmit, publish, display, sublicense, assign or otherwise transfer any Company

Property (including, without limitation, the Software and Related Materials), or any portion thereof or any

derivation thereof, via any medium whatsoever, by operation of law or otherwise to any third party, directly

or indirectly, including, but without limitation, to any joint venture or business combination arrangement

with any other person or entity, without Company's prior written consent; or (c) alter or remove from any

part of the Software or Related Materials any proprietary rights or copyright notices or identification that

indicate Company’s ownership interest therein.

TERM AND TERMINATION

: Licensee may terminate this License Agreement at any time upon written

notice to the Company. The Company may terminate this License Agreement if Licensee fails to comply

with any its terms. The Company may conduct an audit to ensure that Licensee is complying with the

terms of this License Agreement. Upon such termination, the licenses granted by this License Agreement

will terminate and Licensee agrees to stop all use of the Software.

WARRANTY

: TO EXTENT PERMITTED BY APPLICABLE LAW, the Company PROVIDES THE

SOFTWARE "AS-IS" AND DISCLAIMS AND EXCLUDES ALL WARRANTIES AND CONDITIONS,

WHETHER STATUTORY, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-

INFRINGEMENT OF THIRD-PARTY RIGHTS. the Company MAKES NO WARRANTY THAT THE

SOFTWARE WILL BE UNINTERRUPTED, FREE OF VIRUSES OR OTHER HARMFUL CODE,

SECURE, OR ERROR-FREE.

LIMITATION OF LIABILITY

: LICENSEE’S EXCLUSIVE REMEDY FOR ANY DAMAGE OR LOSS SHALL

BE LIMITED TO DIRECT DAMAGES AND SHALL NOT EXCEED THE AMOUNT OF THE LICENSE FEE

PAID. COMPANY SHALL NOT BE LIABLE FOR SPECIAL, INCIDENTAL, CONSEQUENTIAL,

INDIRECT, PUNITIVE, EXEMPLARY OR OTHER SIMILAR DAMAGES, INCLUDING LOST PROFITS,

OR COSTS INCURRED AS A RESULT OF LOSS OF TIME, LOSS OF DATA, LOSS OF THE USE OF

THE SOFTWARE, LOSS OF GOODWILL, INCONVENIENCE, EVEN IF COMPANY HAS BEEN

ADVISED OF, OR SHOULD HAVE KNOWN OF, THE POSSIBILITY OF SUCH DAMAGES.

«
...
232
233
234
235
»

Содержание Lynx DSA












































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Lynx DSA

Бренд: Hama Страницы: 16

Бренд: WATERGUARD Страницы: 2

Бренд: Lutron Electronics Страницы: 20

Бренд: Rion Страницы: 4

Бренд: Kipp & Zonen Страницы: 32

Бренд: Bahco Страницы: 21

Бренд: Kübler Страницы: 72

Бренд: Sagola Страницы: 16

Бренд: KEM Страницы: 49

zelsius C5 -IUF

Бренд: Zenner Страницы: 28

Бренд: R&S Страницы: 46

Бренд: General Страницы: 16

Бренд: WIKA Страницы: 52

Бренд: Crowcon Страницы: 37

Бренд: BRUEL & KJAER Страницы: 26

Бренд: Efergy Страницы: 2

Satfinder 2 HD Slim

Бренд: Alpsat Страницы: 24

Бренд: Dorrough Страницы: 19

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды