Campbell CR850, Руководство оператора

Страница: 332 / 566

Section 8. Operation
332
Table 78. File System Error Codes
Error Code Description
25
Access to uninitialized ram drive
26
Attempted rename across devices
27
Subdirectory is not empty
31
Attempted write to Write Protected disk
32
No response from drive (Door possibly open)
33
Address mark or sector not found
34 Bad sector encountered
35 DMA memory boundary crossing error
36 Miscellaneous I/O error
37 Pipe size of 0 requested
38 Memory-release error (relmem)
39 FAT sectors unreadable (all copies)
40 Bad BPB sector
41
Time-out waiting for filesystem available
42
Controller failure error
43
Pathname exceeds _MAX_PATHNAME
8.4 Telecommunications and Data Retrieval
Telecommunications, in the context of CR800 operation, is the movement of
information between the CR800 and another computing device, usually a PC. The
information can be programs, data, files, or control commands.
Telecommunications systems require three principal components: hardware,
carrier signal, and protocol. For example, a common way to communicate with
the CR800 is with
PC200W software by way of a PC COM port. In this example,
hardware are the PC COM port, the CR800 RS-232 port, and a serial cable. The
carrier signal is RS-232, and the protocol is PakBus®. Of these three, a user most
often must come to terms with only the hardware, since the carrier signal and
protocol are transparent in most applications.
Systems usually require a single type of hardware and carrier signal. Some
applications, however, require hybrid systems that utilize two or more hardware
and signal carriers.
Contact a Campbell Scientific applications engineer for assistance in configuring
any telecommunications system.
Synopses of software to support the various telecommunications devices and
protocols are found in
Support Software
(p. 76, p. 382).
Of special note is Network
Planner
,
a LoggerNet client designed to simplify the configuration of PakBus
telecommunications networks.