Campbell CR850, Руководство оператора

Страница: 331 / 566

Section 8. Operation
331
8.3.5 File Names
The maximum size of the file name that can be stored, run as a program, or FTP
transferred in the CR800 is 59 characters. If the name is longer than 59 characters,
an
Invalid Filename error is displayed. If several files are stored, each with a
long filename, memory allocated to the root directory can be exceeded before the
actual memory of storing files is exceeded. When this occurs, an "insufficient
resources or memory full" error is displayed.
8.3.6 File System Errors
Table File System Error Codes
(p. 331)
lists error codes associated with the
datalogger file system. Errors can occur when attempting to access files on any of
the available drives.
Table 78. File System Error Codes
Error Code Description
1 Invalid format
2 Device capabilities error
3 Unable to allocate memory for file operation
4
Max number of available files exceeded
5
No file entry exists in directory
6
Disk change occurred
7
Part of the path (subdirectory) was not found
8
File at EOF
9
Bad cluster encountered
10 No file buffer available
11 Filename too long or has bad chars
12 File in path is not a directory
13
Access permission, opening DIR or LABEL as file, or trying to open file as
DIR or mkdir existing file
14 Opening read-only file for write
15 Disk full (can't allocate new cluster)
16
Root directory is full
17
Bad file ptr (pointer) or device not initialized
18
Device does not support this operation
19
Bad function argument supplied
20
Seek out-of-file bounds
21 Trying to mkdir an existing dir
22
Bad partition sector signature
23 Unexpected system ID byte in partition entry
24 Path already open