Point User Guide
13
Advanced installation
h
To install Point Administrator during the client installation, select the
Install Point
Administrator
check box.
3
If your network uses the Point Data Server, complete the
Point Data Server
section.
a
Select the
Enable Point Data Service
check box to enable the server.
b
Enter the Point Data Server URL.
c
Enter the Point Data Server Security key.
4
When you are finished setting the company and server settings, click
Save Settings
,
and click
Exit
.
Installing Point on the client workstation
After the network installation and the server configuration are finished, a one-time
installation must be completed on each client workstation. Subsequent client updates are
done automatically from the server when it is updated.
To install Point on the client workstation:
1
From the Windows Start menu, select
Start > Run
.
2
In the
Run
dialog box, click
Browse
to locate the directory that you specified in
Step 6
on page 11, and click
Open
.
3
Double-click
Setup.exe
and click
OK
to run the setup.
The InstallShield Wizard configures the Point installer and checks for any missing
prerequisites.
Related information
•
Refer to
Creating new data folders
, on page 466, for information
about creating and setting up data folders.
•
For more information about Point Data Server, see
www.calyxsoftware.com
, or view the Point Data Server page at
http/
/:pdsb.calyxsupport.com
.
Important
You must have administrator privileges to perform this setup.
Tip
Windows Vista users type
Run
in the
Start
Search
field.
