20
The
Lettering
palette contains various tools for creating a large selection of text arrangements that can be added
to the design. Compared with the preset text shapes available with the
Gallery
button, the tools in the
Lettering
palette offer more layout flexibility, by allowing the length, height, angle and location to be specified.
■
Creating a text shape
To create a text shape and add it to the design:
1
Click the desired tool in the
Lettering
palette. The pointer changes to large crosshairs (
) when it is
moved into the design area.
NOTE: To view a description of a
Lettering
palette tool, move the pointer over the tool. The description
appears in the left corner of the status bar.
2
Click the location in the design area where you wish to add the text shape. A small circle with an X in it
appears.
3
Follow the instructions that appear in the left corner of the status bar to “punch” (i.e., click) within the
design area and specify various text shape parameters, such as the baseline width, the height and the
degree of arching. The instructions that appear differ depending on the
Lettering
palette tool being used.
After the parameters are specified, the
Text
tab of the
Text Properties
dialog box appears.
NOTE: For greater precision, drag the pointer (instead of clicking in the design area) until the desired
measurement appears in the left corner of the status bar.
To finish creating the text shape at any time without specifying the remaining parameters, right-
click in the design area. If parameters are not specified, the default settings are used.
4
In the
Text
box, type the desired text.
NOTE: If the
Simple Text
tool (
) or
Circular Text
tool (
) was selected, multiple lines of text can be
entered. For more information, see
Entering multiple lines of text in chapter 1.
5
Select the desired settings, such as the font or needle (thread) color.
NOTE: To maintain the proportions of the characters (i.e., to prevent distortion when the characters are
adjusted to fit both the baseline width and the text height), select the
Maintain aspect ratio
check
box. A check mark will appear.
6
Click the
OK
button.
■
Adjusting the parameters
To adjust the various text shape parameters, such as the baseline width, the height and the degree of arch-
ing:
1
Using the
Reshape
tool (
), select the punchpoint that adjusts the parameter that you wish to change.
The punchpoint changes to light blue.
2
Drag the selected punchpoint until the text shape has the desired shape.
NOTE: The punchpoints of text shapes that have not been converted to deformed text can only be used
to move the shape or adjust its parameters, but not deform it (i.e., change its shape). For more
information about deforming a text shape, see chapter 17.
Chapter 9: Lettering Palette
Содержание BE-100
Страница 1: ......