manualshive.com logo in svg

Brother BE-100, Рабочая тетрадь

Поделиться
Скачать
Brother BE-100 Скачать руководство пользователя страница 18

15

Since each needle is typically threaded with thread of a different color, selecting a different needle changes the 
color of the thread. The buttons in the 

Needles

 (thread color) palette are used to select the thread color before 

adding a new shape to the design or to change the thread color of the currently selected design shape. The 

Nee-

dles

 (thread color) palette can contain up to 32 colors.

■

Changing the thread color of a design shape

To change the thread color of a shape of the design:

1

Click the 

Move

 tool ( 

 

) in the 

Stock

 toolbar.

2

Click a stitched edge of the design shape whose thread color you wish to change. “Dancing ants” (moving 
dashes) appear around the shape.

3

Do any of the following:

◆

In the 

Needles

 (thread color) palette, click the desired thread color.

◆

In the 

Change Needle

 drop-down list in the 

Ribbon

 bar, select the desired thread color.

◆

Press a number key (1 through 9) on the alphanumeric portion of the keyboard (not the numeric key-
pad) to select the corresponding thread color (1 through 9) in the 

Needles

 (thread color) palette.

NOTE: If the desired thread color is not listed, either a listed thread color can be changed or a new one 

can be added, as described below.

■

Changing a thread color

To change the thread color assigned to a needle:

1

Right-click (click the right mouse button) the button for the thread color that you wish to change. The mas-
ter palette, which lists all available colors, appears.

2

Click the desired thread color.

3

Click the 

OK

 button.

NOTE: If a thread color is changed, all design shapes already assigned the old thread color will change to 

the new color.

■

Adding a thread color

To add a new needle (thread color):

1

On the 

File

 drop-down menu, click 

Design Info

. The 

Design Info

 dialog box appears.

2

On the 

Needles

 tab, click the 

Add Needle

 button to add a new needle. The new needle is given the next 

available number.

3

In the 

Master palette

 drop-down list, select the desired thread color for the new needle.

4

Click the 

Change Color

 button.

5

Click the 

OK

 button.

NOTE: Any new needles added with the 

Design Info

 dialog box are only available for the current design. To 

change the needle colors permanently, click 

Values for New Designs 

on the 

Options

 drop-down menu.

The 

Values for New Designs

 dialog box appears. On the 

Needles

 tab, change the needle colors as 

desired.

Figure 20

Chapter 7: Needles (Thread Color) Palette

Содержание BE-100
























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды