manualshive.com logo in svg

Brother BE-100, Рабочая тетрадь

Поделиться
Скачать
Brother BE-100 Скачать руководство пользователя страница 13

10

This tool is used to highlight the punchpoints of design shapes, allowing you to select and move the points, 
therefore changing the shape of the design. After selecting a punchpoint, it can be deleted, or the commands 
on the 

Punchpoints

 drop-down menu can be used to insert new punchpoints as well as set entry and exit points. 

For more information about the commands available on the 

Punchpoints

 drop-down menu, see chapter 24.

NOTE: The punchpoints of text shapes that have not been converted to deformed text can only be used to 

move the shape or adjust its parameters (baseline width, height, etc.), but not deform it (i.e., change its 
shape). For more information about deforming a text shape, see chapter 17.

To manipulate the individual punchpoints in the outline of each character of a text shape, it must first be 
converted to its various paths and regions. For more information about converting text shapes to paths 
and regions, see chapter 18.

■

Selecting punchpoints

To select punchpoints:

1

Click the 

Reshape

 tool ( 

 ) in the 

Stock

 toolbar. The punchpoints for all shapes within the design appear 

in blue.

NOTE: The magenta handles that appear in text shapes are for kerning. For more information, see 

Changing the kerning between specific characters in chapter 11.

2

Click a punchpoint. The punchpoint changes to light blue when it is selected.

3

To select additional punchpoints, do any of the following:

◆

To select punchpoints that are in sequence, hold down the Shift key and click the last punchpoint in the 
sequence.

◆

To select specific punchpoints that are not in sequence, hold down the Ctrl key and click each addi-
tional punchpoint.

◆

To select all punchpoints in a specific area, drag the pointer over the area containing the desired 
punchpoints, until the selection box encloses them.

NOTE: The buttons in the 

Navigation

 palette can also be used to select punchpoints. For more information, 

see 

Navigating through the design in chapter 23.

To select all punchpoints in the design, click 

Select All

 on the 

Edit

 drop-down menu.

Figure 15

Chapter 4: Reshape Tool ( 

 )

Содержание BE-100
























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды