manualshive.com logo in svg

Brother BE-100, Рабочая тетрадь

Поделиться
Скачать
Brother BE-100 Скачать руководство пользователя страница 17

14

This tool is great for measuring the length of a stitch, the spacing between two shapes in a design, or the overall 
design size.

To measure the distance between any two points in the design:

1

Click the 

Measure

 tool ( 

 ) in the 

Stock

 toolbar. The pointer changes to small crosshairs ( 

 ) when it is 

moved into the design area.

2

Click the position in the design that you wish to measure from. A small circle with an X in it appears.

3

Click (or drag the line) to the position in the design that you wish to measure to. A line between the two 
points appears and the measurement appears in the left corner of the status bar.

NOTE: To keep the measurement line perfectly horizontal or vertical, hold down the Shift key and select 

the second point.

To position the end of the measurement line at the nearest grid intersection, hold down the Ctrl 
key and select the second point.

NOTE: To erase the measurement line so that other measurements can be taken, press the Backspace key 

twice.

Figure 19

Chapter 6: Measure Tool ( 

 )

Содержание BE-100
























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды