93
●
Zoom tool (
)
Used to zoom in precisely on an area by dragging the pointer over the desired area until it is enclosed in
the zoom selection box.
■
BE-100 terms
●
Background image
(
Image
group box on
Background
dialog box) Allows a scanned image to be displayed in the background so
the sewing area can be visualized or an image can be traced. For example, the back of a cap can be
scanned and used as a background image to easily create lettering that matches the arch of the cap.
●
Border group box
(Column tab of
BES Setup
dialog box) Used to determine the default column border width.
●
Character width group box
(
Text Effects
tab of
Text Properties
dialog box) Used to adjust the width of text.
●
Character kerning group box
(
Text Effects
tab of
Text Properties
dialog box) Used to adjust the space between characters uniformly.
●
Clear
(on
Edit
drop-down menu) Deletes or removes the selection.
●
Connect furthest points check box
(
Text
tab of
Text Properties
dialog box) Used to rearrange start and stop points of text shapes so the jump
stitch is as long as possible, making it easier to trim manually with scissors. Same as clicking the
Connect
Furthest
button (
) in the
Text
bar.
●
Connection group box
(
Commands
tab of corresponding
Properties
dialog box) Used to determine how the selected design shape
is connected to the next shape.
●
Crosshairs
(on
View
drop-down menu) Turns on moveable crossed lines that span the screen and are controlled by
the mouse. Used to check the alignment of design shapes.
●
Default corner correction group box
(
Column
tab of
BES Setup
dialog box) Used to determine how angles in columns will be created. Depending
on the degree of the angle and setting selected, the corner may be squared off, mitered, or angled.
●
Deconstruct Text
(on
Shape
drop-down menu) Breaks text shapes into individual characters, allowing resizing, color and
font changes, and placement of single letters. Same as clicking the
Deconstruct Text
button (
) in the
Text
bar.
●
Density adjustment box
(
Stitches
tab of corresponding
Properties
dialog box) Used to control the number of stitches in a given area.
●
Design Info
(on
File
drop-down menu) Allows various custom settings for the current design to be specified. Applies
only to the current design. Values return to default settings after current design is saved and/or closed.
●
Design Reference window
Displays a thumbnail of the entire design. The area shown in the main window is indicated by the dotted
lines. Drag the pointer over the desired area in the
Design Reference
window to zoom in on it.
●
Duplicate
(on
Edit
drop-down menu) Makes a copy of the selection and pastes it into the design area.
●
Entry and exit points check box
(
Markers
dialog box) Used to display small green dots, which indicate the first needle penetration of a
shape, and red dots marking the exit point.
Содержание BE-100
Страница 1: ......
