manualshive.com logo in svg

Brother BE-100, Рабочая тетрадь

Поделиться
Скачать
Brother BE-100 Скачать руководство пользователя страница 53

50

■

Using the Complex Polygon tool ( 

 )

Polygons of any shape can have holes of any shape specified in the area.

To add a polygon with holes in it to the design:

1

Click the 

Complex Polygon

 tool (

 

 

) in the 

Shapes

 toolbar. The pointer changes to large crosshairs ( 

 ) 

when it is moved into the design area.

2

Click in the design area, as if tracing the shape, to specify the punchpoints of the polygon outline.

NOTE: The tools in the 

Points

 palette are used to select what type of line connects the punchpoints. For 

more information, see chapter 22.

3

Right-click once in the design area to close the polygon. A message appears in the status bar, prompting 
the user to punch the hole.

4

Click within the polygon outline, as if tracing the shape, to specify the punchpoints of the hole outline.

NOTE: When creating a hole, do not allow punchpoints to overlap or cross. If this happens, the fill will 

not appear, but there will be a trim marker.

5

Right-click once to close the hole.

6

Repeat steps 4 and 5 until all desired hole outlines are specified.

NOTE: Holes can be cut from polygons after they have been filled. For more information, see chapter 

21.

7

Right-click a second time to fill the polygon.

Figure 87

Содержание BE-100
























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды