manualshive.com logo in svg

Brocade Communications Systems Fabric OS v7.0.1, Справочник по командам

HP Fabric OS v7.0.1 - администраторский руководящий мануал для управления вашими сетевыми устройствами HP. Скачайте бесплатно руководство по администрированию с нашего сайта. Познавайте возможности новой версии программного обеспечения и улучшайте производительность вашей сети с HP Fabric OS v7.0.1.

Поделиться
Скачать
background image

360

Fabric OS Command Reference

53-1001764-01

firmwareDownload

22

All systems supported by this firmware have two partitions of nonvolatile storage (primary and 
secondary) to store two firmware images. This command always downloads the new image to the 
secondary partition and then swaps partitions so the secondary partition becomes the primary. 

By default, 

firmwareDownload

 reboots the system and activates the new image. Finally, the command 

performs a 

firmwareCommit

 automatically to copy the new image to the other partition. In systems with 

blade processors (BPs), after the new CP firmware is downloaded to the system and activated, the BP 
firmware is downloaded to the BP processors if there is a mismatch between the BP and CP firmware.

By default, 

firmwareDownload

 performs a full install, autoreboot, and autocommit. These modes are 

selectable only in single CP (

-s

) mode, in which case autoreboot is OFF by default. 

For each standalone switch in your fabric, complete all firmware download changes before issuing the 

firmwareDownload

 command on the next switch to ensure a nondisruptive download.

If 

firmwareDownload

 is interrupted due to an unexpected reboot as a result of a software error or power 

failure, the command automatically recovers the corrupted secondary partition. Wait for the recovery to 
complete before starting another firmware download.

NOTES

Firmware download and subsequent POST failure may occur on some platforms, if the firmware commit 
operation coincides with the execution of POST. The recommended work around is to disable POST 
(

diagDisablePost

) before you initiate a firmware download and re-enable POST (

diagEnablePost

) after 

the firmware commit operation has completed.

Firmware download procedures may vary depending on which Fabric OS version you are migrating from. 
See the 

Fabric OS Administrator's Guide

 for restrictions on changing Fabric OS versions.

On certain occasions, you may see messages in the console output of 

firmwareDownload

. These are 

internal messages generated by the Linux utilities. You can safely ignore these messages. For relevant 
Brocade-generated firmware download messages, refer to the 

Fabric OS Message Reference

(SULB 

module).

To correlate Brocade blade names with blade IDs, use the 

slotShow

 command.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in 
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for 
details.

OPERANDS

The following operands are optional. When invoked without operands, the command goes into interactive 
mode.

-U

Downloads the firmware from an attached USB device. This option is valid only on 
platforms that support a USB port. Refer to your specific Hardware Reference 
Guide for details. The USB device must be enabled prior to firmware download 
with the 

usbStorage

 command. Firmware must be stored under the default 

firmware directory in the USB file system. On a dual-CP chassis, the USB device 
must be attached to the active CP. When downloading firmware from a USB 
device, the 

-p

 option is ignored.

-s

Enables single-CP mode. This mode supports selectively enabling or disabling a 
full install, autoreboot, and autocommit on bladed and nonbladed systems. On 
enterprise-class platforms, this mode supports upgrading a single CP. When 
downloading the main Fabric OS firmware, this option disables autoreboot, unless 
overridden by the 

-b

 option.

-b

Enables autoreboot mode. When single CP mode is enabled and this operand is 
not specified, 

reboot

 must be run manually to activate the downloaded image. If 

autoreboot mode is enabled, the switch reboots automatically after the firmware 
has been downloaded.

Содержание Fabric OS v7.0.1













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Fabric OS v7.0.1

Quantum GoVault 40GB User Manual preview
GoVault 40GB
Бренд: Quantum Страницы: 91
VMware vSphere 4 Architecture And Performance preview
vSphere 4
Бренд: VMware Страницы: 19
Oberheim Matrix-1000 Owner'S Manual preview
Matrix-1000
Бренд: Oberheim Страницы: 64
MACROMEDIA COLDFUSION 5 - INSTALING AND CONFIGURING... Manual preview
COLDFUSION 5 - INSTALING AND CONFIGURING...
Бренд: MACROMEDIA Страницы: 160
Microtek ScanWizard Pro Reference Manual preview
ScanWizard Pro
Бренд: Microtek Страницы: 177
Ulead BD DISCRECORDER Manual preview
BD DISCRECORDER
Бренд: Ulead Страницы: 18
Roxio Toast 6 Titanium Getting Started Manual preview
Toast 6 Titanium
Бренд: Roxio Страницы: 132
DCP Productions Motif XS Owner'S Manual preview
Motif XS
Бренд: DCP Productions Страницы: 76
Access ATOMIZER Operator'S Manual preview
ATOMIZER
Бренд: Access Страницы: 16
UNIBLUE SPEEDUPMYPC Quick Start Manual preview
SPEEDUPMYPC
Бренд: UNIBLUE Страницы: 3
Sun Microsystems Solaris 7 User Manual preview
Solaris 7
Бренд: Sun Microsystems Страницы: 24
SMC Networks ELITEVIEW Management Manual preview
ELITEVIEW
Бренд: SMC Networks Страницы: 232
Focusrite Plug-in Suite User Manual preview
Plug-in Suite
Бренд: Focusrite Страницы: 9
Qlogic Fast Fabric User Manual preview
Fast Fabric
Бренд: Qlogic Страницы: 174
MACROMEDIA FLASH MX 2004-LEARNING FLASH Manual preview
FLASH MX 2004-LEARNING FLASH
Бренд: MACROMEDIA Страницы: 122
FARONICS DEEP FREEZE ENTERPRISE Manual preview
DEEP FREEZE ENTERPRISE
Бренд: FARONICS Страницы: 104
GRASS VALLEY EDIUS - INSTALLATION V6.0 Installation Manual preview
EDIUS - INSTALLATION V6.0
Бренд: GRASS VALLEY Страницы: 23
Waves Parametric Convolution Reverb IR-1 User Manual preview
Parametric Convolution Reverb IR-1
Бренд: Waves Страницы: 40

Бренды по названию

Популярные бренды

Загрузить еще бренды