manualshive.com logo in svg

Brocade Communications Systems Fabric OS v7.0.1, Справочник по командам, Страница: 403 / 1132

Поделиться
Скачать
Brocade Communications Systems Fabric OS v7.0.1 Скачать руководство пользователя страница 403

Fabric OS Command Reference

377

53-1001764-01

fosConfig

2

fosConfig

Displays or modifies Fabric OS features. 

SYNOPSIS

fosconfig --enable

 

feature

fosconfig --disable

 

feature

fosconfig --show

DESCRIPTION

Use this command to enable or disable a feature, or to display the current operating status of features on 
a switch. This command can be run while the switch is online. 

The following features are supported (refer to the Notes for limitations):

•

FC Routing service (see 

fcrConfigure

)

•

iSCSI service (not supported in Fabric OS v7.0.0 and later).

•

iSNS client service (not supported in Fabric OS v7.0.0 and later).

•

Virtual Fabrics (see 

lfCfg

 and 

lsCfg

 )

•

Ethernet switching service

NOTES

The features described may not be supported on all platforms. If you attempt to enable a feature that is 
not supported on your platform, an error message stating "Command not supported on this platform" is 
displayed.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in 
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for 
details.

OPERANDS

This command has the following operands:

--enable

 

feature

Enables a feature on the switch. Valid values for 

feature

 include the following:

fcr

Enables the FC Routing service on the switch. The FC Routing service is disabled 
by default. Use 

fosConfig --show

 to determine if FCR is enabled or disabled, 

When enabling FCR, you may encounter one of the following system messages:

"FC Routing service is in the process of being disabled, please try again after a 
few minutes."

 This means that a command to disable the FC Routing service is 

still in progress. Wait a few minutes and try again.

"FC Routing service is already enabled."

 This means that the FC Routing service 

is already enabled.

iSCSI

Not supported in Fabric OS v7.0.0 and later.

iSNSC

Not supported in Fabric OS v7.0.0 and later.

vf

Enables Virtual Fabrics. By default, Virtual Fabrics are disabled. Before enabling 
the Virtual Fabrics, ensure that there are no Administrative Domains (ADs) in 
effect. Administrative Domains must be disabled before enabling Virtual Fabrics. 
This command prompts for confirmation, because the chassis reboots after this 
command is executed. 

Содержание Fabric OS v7.0.1













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов