manualshive.com logo in svg

Brocade Communications Systems Fabric OS v7.0.1, Справочник по командам, Страница: 610 / 1132

Поделиться
Скачать
Brocade Communications Systems Fabric OS v7.0.1 Скачать руководство пользователя страница 610

584

Fabric OS Command Reference

53-1001764-01

perfTTmon

22

perfTTmon

Installs the Top Talker monitor in the specified mode. 

SYNOPSIS

perfttmon

Port Mode:

perfttmon --add

 egress | ingress [

slot

/]

port

perfttmon --show

 [

slot

/]

port

     [

number_of_flows

] [wwn| pid]

perfttmon --delete

 [[

slot

/]

port

 | 

-all

 | 

-sconfig

]

Fabric Mode:

perfttmon --add fabricmode

perfttmon --show dom

 

domain id

     [

number_of_flows

] [wwn| pid]

perfttmon --delete fabricmode

perfttmon --help

DESCRIPTION

Use this command to install the Top Talker monitor. The Top Talker feature provides real-time information 
about the top 'n' bandwidth consuming flows from a set of a large number of flows passing through a 
specific point in the network (after initial stabilization).

Top Talkers can display between 1 and 32 flows depending on hardware platform. The maximum flows 
displayed are as follows:

32

For the Brocade 300, 5100, 5300, 6510, 8000 (FC Ports only) FC8-xx, and 
FC16-xx port blades.

16

For the Brocade 5000.

Top Talker supports the following two modes, 

Port Mode

 and 

Fabric Mode

:

•

In 

Port Mode

, Top Talker is installed at the port level to measure the traffic flowing through the port 

to different destinations. The output displays the data in a sorted order based on the data rate of 
each flow.

•

In 

Fabric Mode

, Top Talker measures the top "n" bandwidth using flows on a given switch. Top 

Talker installs only on E_Ports and measures the data rate of all the possible flows in the fabric. Flow 
is a pair of communicating FC addresses (SID and DID). Top Talkers in Fabric Mode and EE 
monitors are mutually exclusive. EE monitors must be removed from all switches before enabling 
fabric mode. 

NOTES

This command requires an Advanced Performance Monitor license.

Top Talkers are incompatible with Frame Redirection, and therefore this feature is not supported on the 
Brocade Encryption switch for encrypted data traffic.

Top Talkers are not supported on embedded platforms.

Содержание Fabric OS v7.0.1













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов