Brocade Communications Systems Fabric OS v7.0.1, Справочник по командам

Страница: 489 / 1132

Fabric OS Command Reference 463
53-1001764-01
ipSecConfig
2
-ipsec ah | esp
Specifies the IPSec protocol. Encapsulating Security Payload (ESP) provides
confidentiality, data integrity and data source authentication of IP packets,
and protection against replay attacks. Authentication Header (AH) provides
data integrity, data source authentication, and protection against replay
attacks but, unlike ESP, does not provide confidentiality.
-action discard | bypass | protect
Specifies the IPSec protection type regarding the traffic flows.
-direction in | out
Specifies traffic flow direction as inbound or outbound.
-mode tunnel | transport
Specifies the IPSec mode. In tunnel mode, the IP datagram is fully
encapsulated by a new IP datagram using the IPSec protocol. In transport
mode, only the payload of the IP datagram is handled by the IPSec protocol;
it inserts the IPSec header between the IP header and the upper-layer
protocol header.
-enc algorithm
Specifies the encryption algorithm. Valid encryption algorithms include the
following:
3des_cbc
3DES algorithm
null_enc
Null encryption algorithm (cleartext)
-auth algorithm
Specifies the authentication algorithm. Valid authentication algorithms include
the following:
hmac_md5
MD5 algorithm
hmac_sha1
SH1 algorithm
-enc-key number
Specifies the encryption key. This is a user-generated key based on the
length of the key. Use the LINUX random key generator or any other
comparable third party utility to generate the manual SA keys. Refer to the
Fabric OS Administrator's Guide for details.
•
A 192-bit value for the 3des_cbc encryption algorithm, for example,
0x96358c90783bbfa3d7b196ceabe0536b
•
A zero-bit value for the null_enc encryption algorithm.
-auth-key number
Specifies the authentication key. This is a user-generated key based on the
length of the key. Valid keys include the following:
•
A 128-bit value for the hmac_md5 authentication algorithm.
•
A 160-bit value for the hmac_sha1 authentication algorithm.
The following operands are optional:
tunnel-local ipaddress
Specifies the local tunnel IPv4 or IPv6 address.
tunnel-remote ipaddress
Specifies the peer tunnel IPv4 or IPv6 address.