Brocade Communications Systems Fabric OS v7.0.1, Справочник по командам

Страница: 1034 / 1132

1008 Fabric OS Command Reference
53-1001764-01
sysMonitor
22
If any configured area exceeds the currently effective threshold settings, the Fabric Watch daemon can
take one or more of the following actions:
•
Send an SNMP message.
•
Log a RAS log message.
•
Send an E-mail alert (valid only for the environment and resource class).
Fabric Watch thresholds vary depending on the class and platform. Refer to the Fabric Watch
Administrator's Guide for defaults and configuration guidelines.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
This command requires a Fabric Watch license.
OPERANDS
This command has the following operands:
class
Specifies a Fabric Watch class to be monitored. This operand is optional with the
--show option; it is required with all configuration options. Valid classes include
the following:
env
Monitors the environment class.
resource
Monitors the resource class.
-area area
Specifies the area that can be configured for this class. This operand is optional
with the
--show option; it is required with all configuration options. Valid areas
include the following:
temp
Specifies the temperature area for the environment class. This area is valid only
with the environment class.
flash
Specifies the flash memory area for the resource class. This area is valid only with
the resource class.
--config class -area area
Configures Fabric Watch thresholds for monitoring a specified class and area.
When configuring Fabric Watch thresholds, you must specify a class and an area.
The following operands are optional; if omitted, Fabric Watch uses default
thresholds.
-highthreshold -value value
Specifies the high threshold for triggering a specified alert action. To change the
default value, provide an integer
value .
-lowthreshold -value value
Specifies the low threshold for triggering a specified alert action. To change the
default value, provide an integer
value .
-trigger above | below
Specifies the actions for in-range behavior. In range is defined as the space above
the low threshold and below the high threshold for a given class and area.