manualshive.com logo in svg

Brocade Communications Systems Fabric OS v7.0.1, Справочник по командам, Страница: 439 / 1132

Поделиться
Скачать
Brocade Communications Systems Fabric OS v7.0.1 Скачать руководство пользователя страница 439

Fabric OS Command Reference

413

53-1001764-01

haEnable

2

haEnable

Enables the High Availability feature. 

SYNOPSIS

haenable

DESCRIPTION

Use this command to enable the High Availability (HA) feature on a switch. If the HA feature is already 
enabled, this command has no effect.

If the HA feature is disabled, this command enables it. The standby CP reboots as part of the process. 
The command displays a warning message and prompts for confirmation before rebooting the CP.

NOTES

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in 
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for 
details.

OPERANDS

None

EXAMPLES

To enable the High Availability feature on a Brocade DCX 85120-8:

switch:admin> 

haenable

Warning: This command will enable the HA. It will reboot the standby 

CP and require all telnet, secure telnet, and SSH sessions to the 

standby CP to be restarted

Are you sure you want to go ahead  [y/n]?

y

y

To verify that High Availability is enabled:

switch:admin> 

hashow

Local CP (Slot 7, CP1): Active, Warm Recovered

Remote CP (Slot 6, CP0): Standby, Healthy

HA enabled, Heartbeat Up, HA State synchronized

SEE ALSO

haDisable

, 

reBoot

 

Содержание Fabric OS v7.0.1













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов