Brocade Communications Systems Fabric OS v7.0.1 Скачать руководство пользователя страница 900

Страница: 900 / 1132

874

Fabric OS Command Reference

53-1001764-01

secAuthSecret

authentication. If switch is configured to do DH-CHAP,

it is performed whenever a port or a switch is enabled.

Warning: Please use a secure channel for setting secrets.

Using an insecure channel is not safe and may compromise

secrets.

Following inputs should be specified for each entry.

1. WWN for which secret is being set up.

2. Peer secret: The secret of the peer that

authenticates to peer.

3. Local secret: The local secret that authenticates peer.

Press Enter to start setting up shared secrets >

Enter WWN, Domain, or switch name (Leave blank when done):

10:00:00:60:69:80:05:14

Enter peer secret:

Re-enter peer secret:

Enter local secret:

Re-enter local secret:

Enter WWN, Domain, or switch name (Leave blank when done):

Are you done? (yes, y, no, n): [no]

Saving data to key store... Done.

To delete the entire secret key database:

switch:admin>

secAuthSecret --remove --all

This command deletes database of DH-CHAP secret keys.

If a fabric requires authentication, deleting this

database may cause switch to segment from the fabric.

Do want to remove secret key database?

(yes, y, no, n): [no]

Deleting secret key database... Done.

Содержание Fabric OS v7.0.1













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Fabric OS v7.0.1

Отзывы:

Похожие инструкции для Fabric OS v7.0.1

Бренды по названию

Популярные бренды

Brocade Communications Systems Fabric OS v7.0.1, Справочник по командам

Результаты поиска

Содержание Fabric OS v7.0.1

Отзывы:

Похожие инструкции для Fabric OS v7.0.1

Бренды по названию

Популярные бренды