manualshive.com logo in svg

Brocade Communications Systems Fabric OS v7.0.1, Справочник по командам, Страница: 621 / 1132

Поделиться
Скачать
Brocade Communications Systems Fabric OS v7.0.1 Скачать руководство пользователя страница 621

Fabric OS Command Reference

595

53-1001764-01

portBeacon

2

portBeacon

Sets port beaconing mode. 

SYNOPSIS

portbeacon --enable

 [

slot

/]

port

portbeacon --disable

 [

slot

/]

port

portbeacon --show

 [

slot

/]

port

portbeacon --help

DESCRIPTION

Use this command to enable or disable beaconing mode on a specified port. 

When beaconing mode is enabled on a port, the port LED flashes amber and green for 2.5 seconds each 
in an alternating pattern. The beaconing mode continues until you turn it off. Beaconing mode is useful if 
you are trying to locate a specific port. 

Beaconing mode takes over the port LEDs. The normal flashing LED pattern associated with an active, 
faulty, or disabled port is suppressed, and only the beaconing pattern is shown. Other commands are still 
executable and functional. However, if diagnostic frame-based tests such as 

portLoopbackTest

 are 

executed, the diagnostic LED pattern is interleaved with the beaconing pattern. Running switch 
beaconing or HBA- side (E2E) beaconing also overwrites the pattern.

NOTES

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in 
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for 
details.

OPERANDS

This command has the following operands:

slot

For bladed systems only, specifies the slot number of the port group to display, 
followed by a slash (/).

port

Specifies the number of the port to be configured, relative to its slot for bladed 
systems. Use 

switchShow

 for a listing of valid ports. 

--enable

Enables beaconing mode on the specified port.

--disable

Disables beaconing mode on the specified port.

--show

Displays the port beaconing mode on the specified port as ON or OFF.

--help

Displays the command usage.

EXAMPLES

To enable beaconing mode on a port:

switch:admin> 

portbeacon --enable 1/0

To disable beaconing mode on a port:

switch:admin> 

chassisbeacon --disable 2/1

Содержание Fabric OS v7.0.1













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов