manualshive.com logo in svg

Brocade Communications Systems Fabric OS v7.0.1, Справочник по командам, Страница: 868 / 1132

Поделиться
Скачать
Brocade Communications Systems Fabric OS v7.0.1 Скачать руководство пользователя страница 868

842

Fabric OS Command Reference

53-1001764-01

portTest

22

Use the 

stopPortTest

 command to stop the test. Refer to the 

stopPortTest

 help page for more 

information.

Use the 

portTestShow

 command to view the current status of 

portTest

. Refer to the 

portTestShow

 

help page for more information.

If there is a port type change during 

portTest

 execution, the test continues on a given port as long as it 

can be supported and it is asked to do so. If a request was made to test all ports on a given switch, 

portTest

 starts a new test appropriate for the new port type.

NOTES

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in 
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for 
details.

OPERANDS

This command has the following operands:

-ports

 

itemlist

Specifies the list of user ports to test. By default, all user ports in the switch are 
tested. Refer to the 

itemList

 help page for more information.

-iteration

 

count

Specifies the number of times (or number of frames per port) to execute this test. 
Specify 0 to run the test in timeout mode, or specify -1 to run the test indefinitely. 
The default value is 20.

-userdelay

 

time

Specifies the delay between frames sent by 

portTest

, in milliseconds. The default 

value is 10 milliseconds.

-timeout

 

time

Specifies the number of seconds to run the test. Setting the iteration to 0 puts the 

portTest

 process into timeout mode. The default value is 0.

-pattern

 

pattern

Specifies the pattern of the test packet payload. The pattern is selected from a set 
of twenty predefined pattern types. Use the 

dataTypeShow

 command to view the 

patterns supported with 

portTest

. For each pattern, the 

datTypeShow

 command 

displays the name, the pattern type number, and an example. Specify the pattern 
by its type number. If 

pattern

 is not specified, it defaults to RANDOM (type=11)

-patsize

 

size

Specifies the size of the pattern. The default pattern size is 1024 bytes. The range 
is 4 to 2112 bytes.

-seed

 

seed

Specifies the seed value to be used with the pattern. The default seed value is 
0xaa.

-listtype

 

porttype

Specifies the type of ports on which to run 

portTest

. Valid values for 

porttype

 

include the following:

-1

All ports (default).

-2

All L_Ports.

-3

All F_Ports.

-4

All E_Ports.

Содержание Fabric OS v7.0.1













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов